Buug-gacmeedka Laba-jiif ee Toosan ee Turret Lathe
Tilmaamaha Mashiinka
1. Mashiinka taxanaha ah wuxuu ku habboon yahay mashiinnada warshadaha gawaarida, marawaxadaha, hawada sare, macdanta iyo sidoo kale birta, iwm.
2. Waxay farsamayn kartaa wejiga tiirka dibadda, oogada koonka ah ee wareegta ah, wejiga madaxa, la toogtay, goynta xadhigga giraangiraha baabuurta.
3. Miiska shaqadu waa in la qaato hagaha biyaha (hydrostatic). Spindle-ku waa in la isticmaalo NN30 (Fasalka D) sidda oo awood u leh inuu si sax ah u leexdo, Awoodda wax-qaadista ayaa wanaagsan.
4. Kiiska Gearku waa in la isticmaalo 40 Cr marsho shiididda. Waxay leedahay saxnaan sare iyo buuq yar. Labada qayb hydraulic iyo qalabka korontada waxaa loo isticmaalaa alaab caan ah oo caan ah gudaha Shiinaha.
5. Siyaabaha hagaha balaastigga ah waa kuwo la xidhan karo
6. Farsamada warshadaynta ee lathe waa in la isticmaalo farsamada xumbo luntay (gaaban LFF). Qaybta jilitaanka ayaa leh tayo wanaagsan.
Tilmaamid
| Tilmaamid | Unug | C5225 | C5235D | CQ5240 | C5240B | C5250 | CQ5263 |
| Max. dhexroorka leexashada ee boostada qalabka toosan | mm | 2500 | 3500 | 4000 | 4000 | 5000 | 6300 |
| Dhexroorka miiska shaqada | mm | 2250 | 3200 | 3200/3600 | 3200/3600 | 4000/4500 | 4500/5700 |
| Max. dhererka workpiece | mm | 1600/2000 | 2000 | 2000/2500 | 2000/2500 | 2000/2500 | 4000 |
| Max. miisaanka workpiece | t | 10/20 | 20 | 10/20 | 32 | 30 | 50/80/120 |
| Xawaaraha miiska shaqada | r/min | 2～63 | 2 ~ 63 | 2～63 | 0.85～40 | 0.6～25.4 | 0.5～22 |
| Tallaabada wareegtada miiska shaqada | Talaabada | 16 | Tallaab la'aan | 16 | Tallaab la'aan | Tallaab la'aan | Tallaab la'aan |
| Qadarka quudinta qalabka boostada | mm/min | 1～500 | 0.1-1000 | 1～500 | 1～500 | 1～500 | 1～500 |
| Talaabada quudinta post post | Talaabada | Tallaab la'aan | Tallaab la'aan | Tallaab la'aan | Tallaab la'aan | Tallaab la'aan | Tallaab la'aan |
| Wareegga ugu sarreeya ee miiska shaqada | KN·m | 63 | 63 | 63 | 63 | 63 | 100 |
| Dhaqdhaqaaqa tooska ah ee boostada qalabka saxda ah | mm | -15～1400 | -20-2000 | -15～2150 | -15～2150 | -15～2750 | -50～3350 |
| Dhaqdhaqaaq toosan ee boostada qalabka saxda ah | mm | 1000/1250 | 1000 | 1000/1250 | 1000/1250 | 1000/1250 | 2100 |
| Dhaqdhaqaaqa tooska ah ee boostada qalabka bidix | mm | -15～1400 | -20-2000 | -15～2150 | -15～2150 | -15～2750 | -50～3350 |
| Dhaqdhaqaaq toosan ee boostada qalabka bidix | mm | 1000/1250 | 1000 | 1000/1250 | 1000/1250 | 1000/1250 | 2100 |
| xagasha lulida ee boostada | ° | ±30 | ±30 | ±30 | ±30 | ±30 | -15～30 |
| Qaybta bar Tool | mm | 40×50 | 40×50 | 40×50 | 40×50 | 40×50 | 80×80 |
| Awoodda matoorka ugu muhiimsan | KW | 55 | 55 | 55 | 55 | 75 | 110 |
| Miisaanka (qiyaastii) | t | 35 | 45 | 45 | 60 | 57 | 100 |
| Cabirka (qiyaastii) | mm | 5180×4560×4680 | 6400×5200×5830 | 7300×5250×6100 | 7300×5250×6100 | 7600×5500×6430 | 13500×6500×7500 |
Fariintaada noo soo dir:
Qaybaha alaabta
-
BOSM -5020-5Z Mishiinka Wax-shiidka ee Madax caajiska Ka soo horjeeda
-
5- dhidibka CNC Horizontal Machining Center oo leh laba...
-
CNC buundada culeyska culus 5-dhidibka GMH-2245-Z
-
Xadiidka adag ee servo turret tailstock T taxane
-
Shan dhidib oo toosan Xarunta Machining Center CV Taxanaha
-
Buugga Hal Tiir oo Toosan Lathe