Buugga Hal Tiir oo Toosan Lathe
Tilmaamaha Mashiinka
1. Mashiinkani wuxuu ku habboon yahay mashiinnada dhammaan noocyada warshadaha. Waxay ka baaraandegi kartaa wejiga tiirka dibadda, dusha koofiyadaha wareegsan, wejiga madaxa, la toogtay, goynta laysarka taayirrada baabuurka.
2. Miiska shaqadu waa in la qaato hagaha hagitaannada biyaha (hydrostaticway). Spindle-ku waa in la isticmaalo NN30 (Fasalka D) sidda oo awood u leh inuu si sax ah u leexdo, Awoodda wax-qaadista ayaa wanaagsan.
3. Kiiska Gear waa in la isticmaalo 40 Cr marsho shiididda. Waxay leedahay saxnaan sare iyo buuq yar. Labada qayb hydraulic iyo qalabka korontada waxaa loo isticmaalaa alaab caan ah oo caan ah gudaha Shiinaha.
4. Siyaabaha hagaha balaastigga ah waa kuwo la xidhan karo
5. Farsamada warshadaynta ee lathe waa in la isticmaalo farsamada xumbo luntay (gaaban LFF). Qaybta jilitaanka ayaa leh tayo wanaagsan.
Tilmaamid
| Magaca | Unug | C5112 | C5116 | C5123 | C5125 | C5131 |
| Max. dhexroorka leexashada ee boostada qalabka toosan | mm | 1250 | 1600 | 2300 | 2500 | 3150 |
| Max. dhexroorka leexashada barta qalabka dhinac | mm | 1100 | 1400 | 2000 | 2200 | 3000 |
| Dhexroorka miiska shaqada | mm | 1000 | 1400 | 2000 | 2200 | 2500 |
| Max. dhererka gabal shaqo | mm | 1000 | 1000 | 1250 | 1300 | 1400 |
| Max. miisaanka shaqada-qaybta | t | 3.2 | 5 | 8 | 10 | 10 |
| Miisaska shaqada ee kala duwan ee xawaaraha wareega | r/min | 6.3 ilaa 200 | 5-160 | 3.2 ilaa 100 | 2～62 | 2～62 |
| Talaabada miiska shaqada ee xawaaraha wareega | tallaabo | 16 | 16 | 16 | 16 | 16 |
| Qadarka quudinta boostada qalabka toosan | mm/min | 0.5 ilaa 500 | 0.5 ilaa 500 | 0.5 ilaa 500 | 0.5 ilaa 500 | 0.5 ilaa 500 |
| Talaabada quudinta ee boostada qalabka toosan | tallaabo | tallaabo la'aan | tallaabo la'aan | tallaabo la'aan | tallaabo la'aan | tallaabo la'aan |
| Qadarka quudinta boostada qalabka dhinaca | mm/min | 0.8 ilaa 86 | 0.8 ilaa 86 | 0.8 ilaa 86 | 0.6 ilaa 56.56 | 0.6 ilaa 56.56 |
| Talaabada quudinta ee boostada qalabka | tallaabo | 12 | 12 | 12 | 12 | 12 |
| Max. goynta xoogga boostada qalab toosan | KN | 20 | 25 | 25 | 25 | 34 |
| Max. goynta xoogga boostada qalab dhinaca | KN | 20 | 20 | 20 | 20 | 20 |
| Max. guud ahaan xoog goynta | KN | 35 | 40 | 40 | 40 | 40 |
| Socdaalka tooska ah ee boostada qalabka | mm | 700 | 915 | 1210 | 1310 | 1600 |
| Safarka tooska ah ee boostada qalabka | mm | 650 | 800/1000 | 800/1000 | 800/1000 | 800/1000 |
| Xagasha lulida ee boostada qalabka toosan | ° | ±30 | ±30 | ±30 | ±30 | ±30 |
| Aalad toosan ayaa ku dhejisa xawaare dhaq-dhaqaaq leh | m/min | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 |
| Qalabka dhinac wuxuu ku dhejiyaa xawaaraha dhaq-dhaqaaqa degdega ah | m/min | 1.8 | 1.8 | 1.8 | 1.8 | 1.8 |
| Xawaaraha kor u qaadista beam | m/min | 0.44 | 0.44 | 0.44 | 0.44 | 0.44 |
| Cabbirka qaybta qalabka | mm | 30×40 | 30×40 | 30×40 | 30×40 | 40×50 |
| Awoodda matoorka ugu muhiimsan | KW | 22 | 30 | 30 | 37 | 45 |
| Miisaanka mashiinka (qiyaastii) | t | 9.5 | 12.1 | 19.8 | 21.8 | 30 |
| Cabirka mashiinka (LxWxH) | mm | 2280×2550×3400 | 2662×2800×3550 | 3235×3240×3910 | 3380×3360×4000 | 3450×3940×4200 |
