Shiinaha CNC Soo-jeedinta Xarunta
Tilmaamaha Mashiinka
HT6M CNC lathe waa isku xirka seddex geesoodka ah, qalabka mashiinka CNC-ga oo si buuxda u xiran.Mashiinka mashiinka-korontada-haydarooliga isku-dhafan ee isku-dhafan wuxuu si buuxda u daboolaa daboolka difaaca, albaabku wuxuu u furan yahay bidixda, miiska qalliinka wuxuu ku yaalaa dhinaca midig ee daboolka ilaalinta go'an, iyo naqshadeynta ergonomic-ka ee ergonomic ayaa ka dhigaysa hawlgalka mid ku habboon.Shaf kasta oo servo feed ah wuxuu qaataa kubbadda aamusnaanta xawaaraha sare leh, isku xirka laastikada ayaa si toos ah ugu xiran, xawaaraha dhaqsaha badan, buuq yar, saxnaanta meelaynta sare iyo saxnaanta meelaynta soo noqnoqda;matoorka servo wuxuu ku qalabaysan yahay encoder qiimaha saxda ah, ma jiro qalad wadareed, xasuus la'aan, Looma baahna in la helo barta tixraaca, macluumaadka booska ma lumin doono ka dib marka korontada la gooyo.Qalabka mashiinku wuxuu leeyahay shaqooyin xooggan, saxsanaan sare, qaabeyn macquul ah, muuqaal qurux badan, hawl fudud iyo dayactir ku habboon.
Tilmaamid
| Tilmaamid | Unug | HT2M | HT3M | HT5M | HT6M | |
| Madaxa lafdhabarta | Nooca | A2-5 | FL 140 h5/ A2-6 | FL 170 h5 | ||
| Spindle xawaaraha ugu badan | rpm | 5000 | 4500 | 4000 | ||
| Spinal power | kW | 5.5-7.5 | 7.5-11 | 11-15 | 15-18.5 | |
| Dhexroorka Chuck | mm | 165 | 210 | 250 | ||
| Cirridka lafdhabarta | mm | 52 | 74 | 87 | ||
| Dhexroorka dhinaca hore | mm | 80 | 100 | 130 | ||
| Duubista lafdhabarta | / | Dufan | ||||
| Saliid dhaqdhaqaaq toosan | / | Saliid | ||||
| Kala duwanaanshaha xawaaraha | rpm | 5-5000 | 5-4500 | 5-4000 | ||
| Goobta shaqada | ||||||
| Lulida ugu badan ee sariirta | mm | 520 | 558 | 576 | 670 | |
| Dhexroor goynta ugu badan | mm | 260 | 318 | 348 | 400 | |
| Dhererka goynta ugu badan | mm | 200 | 300 | 500 | 550 | |
| Safarka dhidibka Z | mm | 250 | 380 | 525 | 600 | |
| Safarka dhidibka X | mm | 150 | 180 | 225 | 267 | |
| Kubbada maroodiga | ||||||
| X/Z dhidibka kubbadda DxP | mm | 32 x 10 | 40x10 | |||
| Quudinta | ||||||
| Si degdeg ah u mara Z | m/min | 30 | ||||
| Si degdeg ah loo maro X | m/min | 30 | ||||
| Socodka degdega ah ee C | m/min | 100 | ||||
| Xoogga dhidibka | ||||||
| Awood quudinta X/Z | N | 3200 | 4500 | 7500 | ||
| dhidibka Qty. | 3 | |||||
| Nidaamka cabbiraadda | ||||||
| Nidaamka cabbiraadda dhidibka X/Z | Codeeye buuxa | |||||
| (X / Z); VDI/DGQ 3441 Meelaynta | mm | 0.006/0.006 | 0.008/0.008 | 0.008/0.01 | ||
| (X/ Z);VDI/DGQ 3441 Ku celcelinta | mm | 0.004/0.004 | 0.004/0.005 | 0.005/0.008 | ||
| Qalabka Nolosha | ||||||
| Qalabka Qty. | - | 12 | ||||
| Turret disk nooca | - | VDI30 | BMT55 | |||
| Ku-xidhnaanta qalabka | mm | □20 Ø25 | □25 Ø40 | |||
| Max.Xawaaraha qalabka la wado | rpm | 3000 | ||||
| Max.torque of qalab wadey | Nm | 27 | 45 | |||
| Tilmaamaha korantada | ||||||
| Voltage | V | 380 ± 10% | ||||
| Soo noqnoqda | Hz | 50 ± 1% | ||||
| Max.awood rakiban | KVA | 20 | 25 | 35 | ||
| 400v fiyuusyada ilaalinta beenta | A | 63 | ||||
| Unugga Haydarooliga | ||||||
| Max.cadaadiska shaqada | baar | 35 | 50 | |||
| Awoodda kaydka | l | 20 | 35 | |||
| socodka bamka | I/ daq | 24 | ||||
| Nidaamka qaboojinta | ||||||
| Awood leh taangi | l | 100 | 150 | 180 | ||
| gaarsiinta bamka | l /min | 30 | ||||
| Cadaadiska bamka | baar | 5 | ||||
| Heerka qaylada | ||||||
| Ka yar | dB (A) | ≤80 | ||||
| Nidaamka xakamaynta | ||||||
| Xakamaynta | FANUC 0i-TF oo lagu daray | |||||
| Miisaanka saafiga ah | kg | 2800 | 3500 | 4000 | 5500 | |
| Xagasha qallafsan, Qalabka | ° | 45°, HT300 | ||||
