Nooca Slant Lathe
Tilmaamaha Mashiinka
HT3 CNC lathe waa isku xirka laba dhidib, qalab mashiinka CNC-ga oo si buuxda u xiran.Mashiinka mashiinka-korontada-haydarooliga isku-dhafka ah ee isku-dhafan wuxuu qaataa dabool difaac oo dhammaystiran, albaabku wuxuu u furan yahay bidixda, miiska qalliinka wuxuu ku yaalaa dhinaca midig ee daboolka ilaalinta go'an ee hawlgalka fudud.Shaf kasta oo servo feed ah wuxuu qaataa kubbadda aamusnaanta xawaaraha sare leh, isku xirka laastikada ayaa si toos ah ugu xiran, xawaaraha dhaqsaha badan, buuq yar, saxnaanta meelaynta sare iyo saxnaanta meelaynta soo noqnoqda;matoorka servo wuxuu ku qalabaysan yahay encoder qiimaha saxda ah, ma jiro qalad wadareed, xasuus la'aan, Looma baahna in la helo barta tixraaca, macluumaadka booska ma lumin doono ka dib marka korontada la gooyo.Qalabka mashiinku wuxuu leeyahay shaqooyin xooggan, saxsanaan sare, qaabeyn macquul ah, muuqaal qurux badan, hawl fudud iyo dayactir ku habboon.
Tilmaamid
| Tilmaamid | Unug | HT2 | HT3 | HT5 | HT6 |
| Madaxa lafdhabarta | Nooca | A2-5 | FL 140 h5 / A2-6 | FL 170 h5 | |
| Spindle xawaaraha ugu badan | rpm | 5000 | 4500 | 4000 | |
| Spinal power | kW | 5.5-7.5 | 7.5-11 | 11-15 | 15-18.5 |
| Dhexroorka Chuck | mm | 165 | 210 | 250 | |
| Cirridka lafdhabarta | mm | 52 | 74 | 87 | |
| Dhexroorka dhinaca hore | mm | 80 | 100 | 130 | |
| Duubista lafdhabarta | / | Dufan | |||
| Saliid dhaqdhaqaaq toosan | / | Saliid | |||
| Kala duwanaanshaha xawaaraha | rpm | 5-5000 | 5-4500 | 5-4000 | |
| Goobta shaqada | |||||
| Lulida ugu badan ee sariirta | mm | 520 | 558 | 576 | 670 |
| Dhexroor goynta ugu badan | mm | 260 | 340 | 348 | 400 |
| Dhererka goynta ugu badan | mm | 200 | 350 | 500 | 550 |
| Safarka dhidibka Z | mm | 250 | 380 | 525 | 600 |
| Safarka dhidibka X | mm | 150 | 180 | 225 | 267 |
| Kubbada maroodiga | |||||
| X/Z dhidibka kubbadda DxP | mm | 32 x 10 | 40x10 | ||
| Quudinta | |||||
| Si degdeg ah u mara Z | m/min | 30 | |||
| Si degdeg ah loo maro X | m/min | 30 | |||
| Xoogga dhidibka | |||||
| Awood quudinta X/Z | N | 3200 | 4500 | 7500 | |
| dhidibka Qty. | 2 | ||||
| Nidaamka cabbiraadda | |||||
| Nidaamka cabbiraadda dhidibka X/Z | Codeeye buuxa | ||||
| (X / Z); VDI/DGQ 3441 Meelaynta | mm | 0.006/0.006 | 0.008/0.008 | 0.008/0.01 | |
| (X/ Z);VDI/DGQ 3441 Ku celcelinta | mm | 0.004/0.004 | 0.004/0.005 | 0.005/0.008 | |
| Ku-xidhnaanta qalabka | |||||
| Qalabka Qty. | Saldhig | 12 | |||
| Turret disk nooca | - | Slot disk | SAUTER | ||
| Ku-xidhnaanta qalabka | mm | □25 Ø40 | |||
| Tilmaamaha korantada | |||||
| Voltage | V | 380 ± 10% | |||
| Soo noqnoqda | Hz | 50 ± 1% | |||
| Max.awood rakiban | KVA | 20 | 25 | 35 | |
| 400v fiyuusyada ilaalinta beenta | A | 63 | |||
| Qaybta fiilooyinka isku xirka | mm2 | 4 x 10 | |||
| Unugga Haydarooliga | |||||
| Max.cadaadiska shaqada | baar | 35 | 45 | 50 | |
| Awoodda kaydka | l | 20 | 35 | ||
| socodka bamka | I/ daq | 24 | |||
| Nidaamka qaboojinta | |||||
| Awood leh taangi | l | 100 | 150 | 180 | |
| gaarsiinta bamka | l /min | 30 | |||
| Cadaadiska bamka | baar | 5 | |||
| Heerka qaylada | |||||
| Ka yar | dB (A) | ≤80 | |||
| Nidaamka xakamaynta | |||||
| Xakamaynta | FANUC 0i-TF oo lagu daray | ||||
| Miisaanka saafiga ah | kg | 2800 | 3200 | 4000 | 5500 |
| Xagasha qallafsan, Qalabka | ° | 45°, HT300 | |||
