Lathe CNC oo laba-laab ah SK32
Habaynta Badeecada
Dulmar Guud oo ku saabsan Badeecada
Qalabka CNC ee Dual-Spindle waa qalab gaar ah oo loogu talagalay mashiinka wax-soo-saarka sare iyo hababka badan. Waxay leedahay qaab-dhismeed sariireed oo 30° u janjeera, oo ay weheliso qaab-dhismeed bir ah oo adag oo adag iyo hageyaal toosan oo toosan oo sax ah. Astaamahani waxay si weyn u xoojiyaan xasilloonida mashiinka iyo hufnaanta ka saarista jajabka. Nidaamkeeda xakamaynta laba-kanaal wuxuu u oggolaanayaa hawlgallada is-waafajinta ama madaxbannaan ee is-waafajinta. Tani waxay suurtogal ka dhigaysaa farsamaynta dabacsan ee isku mar ama isku xigta ee labada daraf ee shaqada. Qalabka wax-soo-saarka wuxuu ku habboon yahay soo saarista waxtarka sare ee ulaha saxda ah, gacmaha, iyo qaybaha adag. Waxay daboolaysaa baahiyaha adag ee warshadaha sida baabuurta, elektaroonigga, iyo mashiinnada guud.
Astaamaha
Naqshad Sariireed oo Adkaysan oo Sare leh:
Sariirta monolithic-ga ah ee 30° u janjeerta waxay hagaajisaa adkaanta, waxay wanaajisaa daadgureynta jajabka, waxayna hubisaa xasilloonida xaaladaha goynta culus iyadoo la ilaalinayo goob shaqo oo nadiif ah.
Xakamaynta Sirdoonka ee Labada-Channel:
Labada isgoys ee CNC lathe waxay si isku mid ah ama si madax-bannaan u shaqeeyaan, taasoo awood u siinaysa mashiinka hababka badan leh (tusaale ahaan, rogista, qodista, taabashada) labada daraf ee qaybaha, taasoo yaraynaysa wareegyada isku-xidhka iyo kor u qaadista hufnaanta in ka badan 30%.
Cabbirrada sida habka isku-xidhka, dhererka dhidibka, iyo dhexroorka godka dhex mara ayaa si gaar ah loogu habeyn karaa si ay ula qabsadaan shaqooyin kala duwan (dhexroorka ugu badan ee isku-xidhka: φ32mm).
Makiinadaha Sax ah & Dabacsanaanta:
Tilmaamaha duubista toosan ee saxda ah (dhidibka X/Z) iyo servo tailstock waxay hubiyaan saxnaanta booska ee soo noqnoqda ee 0.006mm (dhidibka X) iyo qallafsanaanta dusha sare sida Ra 0.4–0.8 (aluminium/bir).
Munaaradda haydarooliga oo leh 8 saldhig (hayayaasha qalabka laba jibbaaran/wareegsan iyo daabyada isku xidha) waxay taageertaa is-dhexgalka hababka badan iyo isbeddellada qalabka degdegga ah.
La qabsiga Waxtarka Sare:
Ka saarista chip-ka gadaal ee otomaatiga ah iyo ilaalinta si buuxda u xiran waxay hubineysaa wax soo saar joogto ah oo deggan iyo badqab hawlgal.
Naqshadaynta qaabaysan waxay ku habboon tahay dhererka mishiinnada ee 370-600mm, oo ku habboon labadaba wax soo saarka dufcad yar iyo mid mug sare leh.
Gunaanad:
Qaabka jirka 30 ° u janjeera, qalabka mashiinka wuxuu leeyahay adkeyn wanaagsan wuxuuna sahlayaa ka saarista jajabka.
Nidaamka xakamaynta laba-kanaalka ah waxaa lagu xidhi karaa isgoyska isku mar ama si gooni gooni ah, sidaas darteedna wuxuu dhammaystirayaa habaynta isku mar ama isku xigxiga ee labada daraf ee qaybaha.
Habka isku xidhka, dhererka dhidibka, dhexroorka daloolka dhex mara, iyo dhexroorka isku xidhka ayaa si gaar ah loo dooran karaa.
Codsiyada
Warshadaha:Qaybaha baabuurta, qalabka elektarooniga ah ee saxda ah, mishiinada guud, wax soo saarka qaybaha haydarooliga.
Xaaladaha Caadiga ah:
Baabuurta: leexashada iyo qodista shabagyada gudbinta iyo shabagyada geerka oo la isku waafajiyay.
Elektaroonikada: Makiinad sax ah oo sare oo loogu talagalay ulaha matoorka yar iyo guryaha dareemayaasha.
Haydarooliga: Samaynta habab badan oo kala duwan oo ah xudunta bamka iyo qaybaha gacmaha.
Mashiinka Guud: Soo saarista dufcad iyo dib u habeynta qaybaha saxda ah ee usha.
Tilmaamaha Farsamada
| Halbeegga | codsi | ||
| Sariir | Habaynta Sariirta | Saldhigga sariirta iyo sariirta waa bir caadi ah oo 30° ah. | |
| Tilmaamaha | Foomka Tilmaamaha X/Z | Tilmaamaha Roogga Toosan ee Sax ah | |
| Foomka Tilmaamaha Y-Dhiska (Dailstock) | |||
| Heerka shaqada | Ballaca Mashiinka Ugu Badan | Usha: φ32mm | |
| Dhererka Hawsha | 370-600mm | ||
| Masaafada ugu badan ee Talada | 1155mm | ||
| X/Z/Y-Dhinac | Safar | X/Z-Dhinac | 150mm/200mm |
| Dhidibka Y (Dabada) | Bidix: 200mm; Midig: 590mm | ||
| Xawaaraha Dhaqso u Dhaqaaqaya | X/Z/Y-Dhinac | 16m/Mini 16m/Mini 10m/Mini | |
| Xuddunta lagu qiimeeyay matoorka | X/Z/Y-Dhinac | 7.7NM7.7NM6NM | |
| Saxnaanta booska soo noqnoqda (/300mm) | X/Z/Y-Dhinac | 0.006mm0.01mm0.015mm | |
| Qabasho | Soo Saarista Korontada (Si Joogto ah) | 3KW (xawaaraha ugu badan 2000r/daqiiqo) | |
| Faahfaahinta | JHP-32(255): OD-ga ugu badan ee la xidho φ32mm | ||
| Habka Gudbinta | Suunka Isku-dhafan | ||
| Turret | Foomamka Turret iyo Tilmaamaha | Munaaradda Haydarooliga: 63-8T (228) | |
| Awoodda Qalabka | 8 (2 qalab oo laba jibbaaran, 2 qalab oo godad wareegsan leh, 4 daab oo isku xira) | ||
| Cabbirka Qalabka | Qalabka labajibbaaran ee haysta 20mmx20mm, god wareegsan Φ25mm | ||
| Dabada dambe | Nooca Dabada | 1.bidix/midig: servo tailstock + xarun la dhaqaajin karo oo ku dhex jirta | |
| Nooca Gacanta Dabada | Lama fidsan karo oo la hagaajiyay | ||
| Godka dabada ee gacmaha | Mo 4# | ||
| Ka saarista Chip | Nooca Ka Saarista Chip | Gadaasha otomaatiga ah | |
| Saxnaanta Mashiinka | Wareeg | 0.005mm | |
| Iswaafajinta Dhexroorka | 0.015mm/300mm | ||
| Fidsanaan | 0.015mm/300mm | ||
| Qalafsanaanta Dusha sare (Aluminium/Bir) | 0.4HRa~0.8HRa | ||
| Noocyada ilaalinta | Shaadh Dibadda ah oo si Buuxda u Xidhan + Ilaalin Buuxa oo Gudaha ah |
| |
| Cabbirka | Cabbirka mashiinka (Dhererka*Ballaca*Dhererka) | 2650x1900(2800)x1700 | |
Naqshad Sariireed oo Adkaysan oo Sare leh:
Sariirta monolithic-ga ah ee 30° u janjeerta waxay hagaajisaa adkaanta, waxay wanaajisaa daadgureynta jajabka, waxayna hubisaa xasilloonida xaaladaha goynta culus iyadoo la ilaalinayo goob shaqo oo nadiif ah.
Xakamaynta Sirdoonka ee Labada-Channel:
Laba-jibbaarane ayaa si isku mid ah ama si madax-bannaan u shaqeeya, taasoo awood u siinaysa farsamaynta hababka badan (tusaale ahaan, rogista, qodista, taabashada) labada daraf ee qaybaha, taasoo yaraynaysa wareegyada isku-xidhka iyo kor u qaadista hufnaanta in ka badan 30%.
Cabbirrada sida habka isku-xidhka, dhererka dhidibka, iyo dhexroorka godka dhex mara ayaa si gaar ah loogu habeyn karaa si ay ula qabsadaan shaqooyin kala duwan (dhexroorka ugu badan ee isku-xidhka: φ32mm).
Makiinadaha Sax ah & Dabacsanaanta:
Tilmaamaha duubista toosan ee saxda ah (dhidibka X/Z) iyo servo tailstock waxay hubiyaan saxnaanta booska ee soo noqnoqda ee 0.006mm (dhidibka X) iyo qallafsanaanta dusha sare sida Ra 0.4–0.8 (aluminium/bir).
Munaaradda haydarooliga oo leh 8 saldhig (hayayaasha qalabka laba jibbaaran/wareegsan iyo daabyada isku xidha) waxay taageertaa is-dhexgalka hababka badan iyo isbeddellada qalabka degdegga ah.
La qabsiga Waxtarka Sare:
Ka saarista chip-ka gadaal ee otomaatiga ah iyo ilaalinta si buuxda u xiran waxay hubineysaa wax soo saar joogto ah oo deggan iyo badqab hawlgal.
Naqshadaynta qaabaysan waxay ku habboon tahay dhererka mishiinnada ee 370-600mm, oo ku habboon labadaba wax soo saarka dufcad yar iyo mid mug sare leh.
Gunaanad:
Qaabka jirka 30 ° u janjeera, qalabka mashiinka wuxuu leeyahay adkeyn wanaagsan wuxuuna sahlayaa ka saarista jajabka.
Nidaamka xakamaynta laba-kanaalka ah waxaa lagu xidhi karaa isgoyska isku mar ama si gooni gooni ah, sidaas darteedna wuxuu dhammaystirayaa habaynta isku mar ama isku xigxiga ee labada daraf ee qaybaha.
Habka isku xidhka, dhererka dhidibka, dhexroorka daloolka dhex mara, iyo dhexroorka isku xidhka ayaa si gaar ah loo dooran karaa.
| Halbeegga | codsi | ||
| Sariir | Habaynta Sariirta | Saldhigga sariirta iyo sariirta waa bir caadi ah oo 30° ah. | |
| Tilmaamaha | Foomka Tilmaamaha X/Z | Tilmaamaha Roogga Toosan ee Sax ah | |
| Foomka Tilmaamaha Y-Dhiska (Dailstock) | |||
| Heerka shaqada | Ballaca Mashiinka Ugu Badan | Usha: φ32mm | |
| Dhererka Hawsha | 370-600mm | ||
| Masaafada ugu badan ee Talada | 1155mm | ||
| X/Z/Y-Dhinac | Safar | X/Z-Dhinac | 150mm/200mm |
| Dhidibka Y (Dabada) | Bidix: 200mm; Midig: 590mm | ||
| Xawaaraha Dhaqso u Dhaqaaqaya | X/Z/Y-Dhinac | 16m/Mini 16m/Mini 10m/Mini | |
| Xuddunta lagu qiimeeyay matoorka | X/Z/Y-Dhinac | 7.7NM7.7NM6NM | |
| Saxnaanta booska soo noqnoqda (/300mm) | X/Z/Y-Dhinac | 0.006mm0.01mm0.015mm | |
| Qabasho | Soo Saarista Korontada (Si Joogto ah) | 3KW (xawaaraha ugu badan 2000r/daqiiqo) | |
| Faahfaahinta | JHP-32(255): OD-ga ugu badan ee la xidho φ32mm | ||
| Habka Gudbinta | Suunka Isku-dhafan | ||
| Turret | Foomamka Turret iyo Tilmaamaha | Munaaradda Haydarooliga: 63-8T (228) | |
| Awoodda Qalabka | 8 (2 qalab oo laba jibbaaran, 2 qalab oo godad wareegsan leh, 4 daab oo isku xira) | ||
| Cabbirka Qalabka | Qalabka labajibbaaran ee haysta 20mmx20mm, god wareegsan Φ25mm | ||
| Dabada dambe | Nooca Dabada | 1.bidix/midig: servo tailstock + xarun la dhaqaajin karo oo ku dhex jirta | |
| Nooca Gacanta Dabada | Lama fidsan karo oo la hagaajiyay | ||
| Godka dabada ee gacmaha | Mo 4# | ||
| Ka saarista Chip | Nooca Ka Saarista Chip | Gadaasha otomaatiga ah | |
| Saxnaanta Mashiinka | Wareeg | 0.005mm | |
| Iswaafajinta Dhexroorka | 0.015mm/300mm | ||
| Fidsanaan | 0.015mm/300mm | ||
| Qalafsanaanta Dusha sare (Aluminium/Bir) | 0.4HRa~0.8HRa | ||
| Noocyada ilaalinta | Shaadh Dibadda ah oo si Buuxda u Xidhan + Ilaalin Buuxa oo Gudaha ah | ||
| Cabbirka | Cabbirka mashiinka (Dhererka*Ballaca*Dhererka) | 2650×1900(2800)x1700 | |
Qaybaha alaabta
-
Xarunta Mashiinka CNC ee Taxanaha VC ee Adkaanta Sare...
-
Tilmaamaha Toosan ee Taxanaha HP Taxanaha Jiifka ah ee Dhaqaaqaya Tiirka...
-
Tilmaamaha Toosan ee Tiirka HT ee Jiifka ah ee Dhaqaaqa...
-
VS Taxanaha Afar-track Culus ee CNC Machining C ...
-
Xarunta Mashiinka CNC ee Taxanaha V oo leh Adkayn Sare
-
Xarunta Mashiinka CNC ee Taxanaha X ee Laba-geeska ah
-
Xarunta Mashiinka CNC ee 5-dhidibka Jiifka ah TKG1600
-
Cent-ka CNC ee toosan ee leexashada iyo shiididda...
-
Xarunta Mashiinka CNC Xawaaraha Sare Taxanaha GM
-
Taxanaha CNC ee Xawaaraha Sare
-
Lathe CNC oo laba-laab ah SK32
-
Xarunta Mashiinka Toosan ee CNC RFTV510 ee loogu talagalay Giraangiraha...