Taxanaha TTS-ga ee CNC Double Spindle
Habaynta Badeecada
Astaamaha
Adkeyn sare, rogid culus, xasilooni sare
Mashiinka lathe-ka CNC wuxuu qaataa sariir 300-jeex ah oo isku dhafan, iyo naqshad feeraha oo dhumuc weyn leh si loo yareeyo qallooca
iyo isbeddelka kulaylka.
Iska soo horjeeda laba-geesoodka ah, dhinacyada bidix iyo midig ayaa isla markiiba la farsameyn karaa, si weyn.
gaabinta wakhtiga farsamaynta.
Turrets-ka sare iyo kuwa hoose waxay ku qalabaysan yihiin shaqooyin wax lagu shiido (turrets-ka sare waa la qalabeeyay
oo leh dhidibka Y), waxayna rakibi kartaa ilaa 48 qalab.
Waxay wax walba qaban kartaa laga bilaabo dufcado yaryar oo noocyo badan leh ilaa wax soo saar baaxad weyn leh.
Dhammaan hababka waxaa lagu dhammaystiri karaa hal xarig.
Tilmaamaha Farsamada
| Shay | CNC-580TTS(550) | CNC-580TTS(1000) |
| Qaab-dhismeedka sariirta | Sariirta iyo salka waxay ka samaysan yihiin bir tayo sare leh, sariirtuna waxay u janjeertaa 30°. | Sariirta iyo salka waxaa laga sameeyay bir tayo sare leh, sariirtuna waxay u janjeertaa xagal 45° ah. |
| Kala duwanaanshaha habaynta | ||
| Dhexroorka ugu badan ee wareegga sariirta | 550mm | 600mm |
| Dhexroorka ugu badan ee habaynta saxannada | 245mm | 260mm |
| Dhexroorka ugu badan ee farsamaynta ee gaadhiga | 245mm | 260mm |
| Ugu badnaan dhererka habaynta ee baarka | 540mm | 1000mm |
| Dhexroorka ugu badan ee baarka | Weyn: 51mm / Hoos: 45mm (Qayb: 51mm) | Cabbirka ugu weyn: 65mm / Hoos: 45mm (Qayb: 52mm) |
| Safarka iyo quudinta | ||
| Safarka ugu badan ee dhidibka X1/X2 | Dhexroorka 440/360mm/Xogta boolal 220/180mm | Dhexroorka 480/390mm/Xogta usha boolal 240/195mm |
| Safarka ugu badan ee dhidibka Z1/Z2/Z3 | 480/550/520mm | 1000mm |
| Safarka ugu badan ee dhidibka Y | ±75mm | ±75mm |
| Cabbirka baqshadda | 540mm | 1000mm |
| Xawaaraha degdega ah ee dhidibka X1/X2/Z1/Z2/Z3/Y1/Y2 | 30m/daqiiqo | 24m/daqiiqo |
| Dhexroorka boolal X1/X2/Z1/Z2/Z3/Y1/Y2 | 40/10mm | 40/10mm |
| Ballaca hagaha toosan ee X1/X2/Z1/Z2/Z3 | 35mm | 45mm |
| Matoorka servo-ga ee X1/X2 | β12/ β12 (Bareega) | β22/ β12 (Bareega) |
| Matoorka adeegga ee Z1/Z2/Z3 | β12/ β12/ β12 | β22/ β22/ β22 |
| Matoorka adeegga Y1/Y2 | β12 (Bareega) | β12 (Bareega) |
| Matoorka munaaradda Servo | 3N.m | 3N.m |
| Matoorka madaxa korontada | β22 | β22 |
| Saxnaanta | ||
| Saxnaanta booska dhidibka X1/X2/Z1/Z2/Z3/Y1/Y2 | ±0.003/300mm | ±0.003/300mm |
| Ku celcelinta dhidibka X1/X2/Z1/Z2/Z3/Y1/Y2 | ±0.003/300mm | ±0.003/300mm |
| Spindle | ||
| Isgoyska | Muhiim: A2-6/ Hoos: A2-5 | Muhiim: A2-6/ Hoos: A2-5 |
| Dhexroorka dhalidda dunmiiqa | Muhiim: ф66mm/ Hoos: ф56mm | Muhiim: ф79mm/ Hoos: ф56mm |
| Xawaaraha ugu badan ee isbaarada | Heerka ugu sarreeya: 4000 rpm / Heerka hoose: 5500 rpm | Heerka ugu sarreeya: 4000 rpm / Heerka hoose: 4500 rpm |
| Awoodda matoorka adeegga dunmiiqa | Ugu weyn: 11/15KW/Hoos: 17.5KW | Ugu weyn: 11/15KW/Hoos: 17.5KW |
| Nidaamka isku xidhka Haydarooliga | 8 ''/8 '' (Chuck) | 8 ''/8 '' (Chuck) |
| Madaxa awoodda | ||
| Madaxa korontada 90° (Tarnetka Weyn/Hoos-u-dhac) | ER32/3000 rpm | ER40/3000 rpm |
| Madaxa korontada 0° (Tarnetka Weyn/Hoos-u-dhac) | ER32/3000 rpm | ER40/3000 rpm |
| Turret | ||
| Tilmaamaha turret-ka (Turret-ka ugu weyn/hoosaadka) | Saldhigyada BMT55/16 | Saldhigyada BMT65/12 |
| Cabbirka madaxa qalabka (Tartanka ugu weyn/hoosaadka) | 450mm | 380mm |
| Tilmaamaha hayaha qalabka (Tartanka ugu weyn/hoosaadka) | □25×25 | □25×25 |
| Qalabka hayaha caajiska ah (Main/Subturre) | Φ40mm | Φ40mm |
| Kuwa kale | ||
| Awood guud | 46KW | 60KW |
| Miisaanka saafiga ah ee qalabka mashiinka | 7500Kg | 9000Kg |
| Cabbirka mashiinka (L × W × H) | 4500 × 2600 × 2400 | 6000 × 2800 × 2400mm |
Sifooyinka Habaynta
Spindle
Mashiinka CNC wuxuu taageeraa saxnaanta sare iyo shaqada culus si loo kordhiyo wax soo saarka.
Turret
Waxay hagaajisaa isku halaynta tusmada waxayna hubisaa adkeysi sare.
Nidaamka
Nidaamka caadiga ah ee FANUC F Oi-TF Plus CNC, waxqabadka farsamaynta sare heerka hawlgalka sare, fududaynta isticmaalka sare.
Adkeysi Sare
Saldhigga Birta ee culus iyo Qaybaha, nuugista shoogga xooggan iyo xasillooni sare.
Kubbadda Kubbadda
Is-beddelka boolal-ka, dib-u-celinta iyo kordhinta heerkulka ayaa hore loo tirtiray.
Tilmaamaha Toosan ee Roogga leh
Goynta qaansada, jarista bevel-ka, iyo qaab-dhismeedka dusha sare ee isku midka ah. Wareeg xawaare sare leh oo caalami ah.
Adkeyn sare, jarid culus, xasillooni sare
Waxay qaadataa sariir 300 oo is dulsaaran oo isku dhafan, iyo naqshad feeraha oo dhumuc weyn leh si loo yareeyo qallooca.
iyo isbeddelka kulaylka.
Iska soo horjeeda laba-geesoodka ah, dhinacyada bidix iyo midig ayaa isla markiiba la farsameyn karaa, si weyn.
gaabinta wakhtiga farsamaynta.
Turrets-ka sare iyo kuwa hoose waxay ku qalabaysan yihiin shaqooyin wax lagu shiido (turrets-ka sare waa la qalabeeyay
oo leh dhidibka Y), waxayna rakibi kartaa ilaa 48 qalab.
Waxay wax walba qaban kartaa laga bilaabo dufcado yaryar oo noocyo badan leh ilaa wax soo saar baaxad weyn leh.
Dhammaan hababka waxaa lagu dhammaystiri karaa hal xarig.
| Shay | CNC-580TTS(550) | CNC-580TTS(1000) |
| Qaab-dhismeedka sariirta | Sariirta iyo salka waxay ka samaysan yihiin bir tayo sare leh, sariirtuna waxay u janjeertaa 30°. | Sariirta iyo salka waxaa laga sameeyay bir tayo sare leh, sariirtuna waxay u janjeertaa xagal 45° ah. |
| Kala duwanaanshaha habaynta | ||
| Dhexroorka ugu badan ee wareegga sariirta | 550mm | 600mm |
| Dhexroorka ugu badan ee habaynta saxannada | 245mm | 260mm |
| Dhexroorka ugu badan ee farsamaynta ee gaadhiga | 245mm | 260mm |
| Ugu badnaan dhererka habaynta ee baarka | 540mm | 1000mm |
| Dhexroorka ugu badan ee baarka | Weyn: 51mm / Hoos: 45mm (Qayb: 51mm) | Cabbirka ugu weyn: 65mm / Hoos: 45mm (Qayb: 52mm) |
| Safarka iyo quudinta | ||
| Safarka ugu badan ee dhidibka X1/X2 | Dhexroorka 440/360mm/Xogta boolal 220/180mm | Dhexroorka 480/390mm/Xogta usha boolal 240/195mm |
| Safarka ugu badan ee dhidibka Z1/Z2/Z3 | 480/550/520mm | 1000mm |
| Safarka ugu badan ee dhidibka Y | ±75mm | ±75mm |
| Cabbirka baqshadda | 540mm | 1000mm |
| Xawaaraha degdega ah ee dhidibka X1/X2/Z1/Z2/Z3/Y1/Y2 | 30m/daqiiqo | 24m/daqiiqo |
| Dhexroorka boolal X1/X2/Z1/Z2/Z3/Y1/Y2 | 40/10mm | 40/10mm |
| Ballaca hagaha toosan ee X1/X2/Z1/Z2/Z3 | 35mm | 45mm |
| Matoorka servo-ga ee X1/X2 | β12/ β12 (Bareega) | β22/ β12 (Bareega) |
| Matoorka adeegga ee Z1/Z2/Z3 | β12/ β12/ β12 | β22/ β22/ β22 |
| Matoorka adeegga Y1/Y2 | β12 (Bareega) | β12 (Bareega) |
| Matoorka munaaradda Servo | 3N.m | 3N.m |
| Matoorka madaxa korontada | β22 | β22 |
| Saxnaanta | ||
| Saxnaanta booska dhidibka X1/X2/Z1/Z2/Z3/Y1/Y2 | ±0.003/300mm | ±0.003/300mm |
| Ku celcelinta dhidibka X1/X2/Z1/Z2/Z3/Y1/Y2 | ±0.003/300mm | ±0.003/300mm |
| Spindle | ||
| Isgoyska | Muhiim: A2-6/ Hoos: A2-5 | Muhiim: A2-6/ Hoos: A2-5 |
| Dhexroorka dhalidda dunmiiqa | Muhiim: ф66mm/ Hoos: ф56mm | Muhiim: ф79mm/ Hoos: ф56mm |
| Xawaaraha ugu badan ee isbaarada | Heerka ugu sarreeya: 4000 rpm / Heerka hoose: 5500 rpm | Heerka ugu sarreeya: 4000 rpm / Heerka hoose: 4500 rpm |
| Awoodda matoorka adeegga dunmiiqa | Ugu weyn: 11/15KW/Hoos: 17.5KW | Ugu weyn: 11/15KW/Hoos: 17.5KW |
| Nidaamka isku xidhka Haydarooliga | 8 ”/8” (Chuck) | 8 ”/8” (Chuck) |
| Madaxa awoodda | ||
| Madaxa korontada 90° (Tarnetka Weyn/Hoos-u-dhac) | ER32/3000 rpm | ER40/3000 rpm |
| Madaxa korontada 0° (Tarnetka Weyn/Hoos-u-dhac) | ER32/3000 rpm | ER40/3000 rpm |
| Turret | ||
| Tilmaamaha turret-ka (Turret-ka ugu weyn/hoosaadka) | Saldhigyada BMT55/16 | Saldhigyada BMT65/12 |
| Cabbirka madaxa qalabka (Tartanka ugu weyn/hoosaadka) | 450mm | 380mm |
| Tilmaamaha hayaha qalabka (Tartanka ugu weyn/hoosaadka) | □25×25 | □25×25 |
| Qalabka hayaha caajiska ah (Main/Subturre) | Φ40mm | Φ40mm |
| Kuwa kale | ||
| Awood guud | 46KW | 60KW |
| Miisaanka saafiga ah ee qalabka mashiinka | 7500Kg | 9000Kg |
| Cabbirka mashiinka (L × W × H) | 4500 × 2600 × 2400 | 6000 × 2800 × 2400mm |
Qaybaha alaabta
-
Xarunta Mashiinka CNC ee Taxanaha VC ee Adkaanta Sare...
-
Tilmaamaha Toosan ee Taxanaha HP Taxanaha Jiifka ah ee Dhaqaaqaya Tiirka...
-
Tilmaamaha Toosan ee Tiirka HT ee Jiifka ah ee Dhaqaaqa...
-
VS Taxanaha Afar-track Culus ee CNC Machining C ...
-
Xarunta Mashiinka CNC ee Taxanaha V oo leh Adkayn Sare
-
Xarunta Mashiinka CNC ee Taxanaha X ee Laba-geeska ah
-
Xarunta Mashiinka CNC ee 5-dhidibka Jiifka ah TKG1600
-
Cent-ka CNC ee toosan ee leexashada iyo shiididda...
-
Xarunta Mashiinka CNC Xawaaraha Sare Taxanaha GM
-
Taxanaha CNC ee Xawaaraha Sare
-
Lathe CNC oo laba-laab ah SK32
-
Xarunta Mashiinka Toosan ee CNC RFTV510 ee loogu talagalay Giraangiraha...