Xarunta Mashiinka ee Shan-Axis Gantry Taxanaha PM-U
Astaamaha
Taxanahan alaabtu waa xarun makiinado shan-dhidible ah oo iskeed u horumarsan oo leh qaab-dhismeed is haysta, waxqabad aad u fiican, xawaare sare, saxnaan sare, adkeysi sare, iwm. Waxay ku habboon tahay qaybaha makiinado ee warshado kala duwan sida hawada sare, mishiinnada injineernimada, gaadiidka tareenka, caaryada saxda ah, tamarta dabaysha, iwm.
Taxanaha PM-U
Waxay qaadataa madax laba jibbaaran oo A/C ah oo xawaare sare leh iyo madax sax ah, waxayna ku qalabaysan tahay isteerin koronto oo awood sare leh iyo mid xoog badan leh, kaas oo leh awood jaritaan oo xooggan.
Madaxa labajibbaaran ee A/C
Mashiinka wax lagu shiido ee CNC nooca Gantry wuxuu qaataa madaxyo labajibbaaran oo saxnaan sare leh, firfircoon oo firfircoon, wuxuuna ku qalabaysan yahay isteerin koronto oo xawaare sare leh, oo buuxinaya shuruudaha sare ee saxnaanta qaybaha, tayada dusha sare, iyo hufnaanta habaynta.
Naqshadeynta qaab-dhismeedka adag ee sare
Hababka naqshadeynta curiyeyaasha kama dambaysta ah waxaa loo isticmaalaa in lagu sameeyo falanqayn joogto ah iyo mid qaabaysan oo ku saabsan qaybo kala duwan oo ka mid ah xarunta mashiinka CNC si loo sii wanaajiyo qaab-dhismeedka badeecada loona gaaro naqshad dhisme oo adag oo fudud.
Qaab-dhismeedka taageerada kaabayaasha ah ee boolal
Dhererka-safarkaBoorka rasaasta waxaa ku qalabaysan taageero sabeynaysa, taas oo si wax ku ool ah u hagaajin karta xawaaraha xadka ee boolka rasaasta iyo xasilloonida wareegga xawaaraha sare leh.
Joornaalka Qalabka
Noocyo kala duwan oo joornaalo qalab ah, 24/32/40/60, ayaa diyaar u ah in si wax ku ool ah loo soo gaabiyo saacadaha shaqada ee dheeraadka ah.
Taageero adag oo sare
Themashiinsariirta waxaa ku qalabaysan saddex hagayaal oo cabbirkoodu weyn yahay, kuwaas oo bixiya taageero ku filan oo adag iyo haynta saxda ah.
Naqshadeynta badbaadada aadanaha
Naqshadda birta xaashida ah ee ku taal xagga hoose eemiiska shaqadawaxay ka hortagtaa jajabyada birta ah inay galaan mashiinka milling-ka ee CNC sariirta. Meesha lagu dhex daro ee laga saaro jajabka ayaa si aasaasi ah u baabi'isa dhibaatada daadashada biyaha.
Tilmaamaha Farsamada
| Shay | Cutubka | RFPM3028U | RFPM4028U | RFPM6028U | RFPM4033U |
| Kala duwanaanshaha habaynta |
|
|
|
|
|
| Safarka dhidibka X/Y/Z | mm | 3200/3200/1000 | 4200/3200/1000 | 6200/3200/1000 | 4200/3700/1000 |
| Kala duwanaanshaha wareegga dhidibka A/C | ° | ±105/±360 | ±105/±360 | ±105/±360 | ±105/±360 |
| Ballac wax ku ool ah oo Gantry ah | mm | 2800 | 2800 | 2800 | 3300 |
| Masaafada u dhaxaysa sanka dunduleelka ilaa miiska shaqada | mm | 200-1200 | 200-1200 | 200-1200 | 200-1200 |
| Miiska Shaqada |
|
|
|
|
|
| Cabbirrada miiska shaqada | mm | 2000 × 3000 | 2000 × 4000 | 2000 × 6000 | 2500 × 4000 |
| Awoodda culeyska sita ee miiska shaqada | t | 16 | 20 | 26 | 22 |
| Tilmaamaha T-slot | mm | 28 | 28 | 28 | 28 |
| Quudinta wadista |
|
|
|
|
|
| Xawaaraha ugu badan ee quudinta X/Y/Z | m/daqiiqad | 12/12/12 | 12/12/12 | 12/12/12 | 10/10/10 |
| Xawaaraha ugu badan ee quudinta A/C | rpm | 60 | 60 | 60 | 60 |
| Xawaaraha degdega ah X/Y/Z | m/daqiiqad | 20/20/15 | 20/20/15 | 15/20/15 | 15/15/15 |
| A/C-ga xawaaraha degdega ah | rpm | 100 | 100 | 100 | 100 |
| Spindle |
|
|
|
|
|
| Habka wadista |
| Isteerinka korontada | Isteerinka korontada | Isteerinka korontada | Isteerinka korontada |
| Xawaaraha ugu badan ee wareegga | rpm | 7000 | 7000 | 7000 | 7000 |
| Awoodda isbaarada (S1/S6) | Kw | 50/60 | 50/60 | 50/60 | 50/60 |
| Wareegga isbaarada (S1/S6) | Nm | 318/382 | 318/382 | 318/382 | 318/382 |
| Isgoyska |
| HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 |
| Joornaalka Qalabka (ikhtiyaar) |
|
|
|
|
|
| Awoodda majaladda qalabka | T | 24 | 24 | 24 | 24 |
| Nooca hayaha qalabka |
| HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 |
| Dhexroorka ugu badan ee qalabka | mm | ф110/ф200 | ф110/ф200 | ф110/ф200 | ф110/ф200 |
| Dhererka ugu badan ee qalabka | mm | 350 | 350 | 350 | 350 |
| Miisaanka ugu badan ee qalabka | kg | 20 | 20 | 20 | 20 |
| Saxnaanta |
|
|
|
|
|
| Saxnaanta booska X/Y/Z | mm | 0.018/0.018/0.014 | 0.020/0.018/0.014 | 0.028/0.018/0.014 | 0.020/0.018/0.014 |
| Ku celcelinta X/Y/Z | mm | 0.012/0.012/0.010 | 0.012/0.012/0.010 | 0.018/0.012/0.010 | 0.012/0.012/0.010 |
| Kuwa kale |
|
|
|
|
|
| Miisaanka mashiinka | t | 57 | 63 | 75 | 70 |
| Cabbirka mashiinka (L × W × H) | cm | 910×670×650 | 1110 × 670 × 650 | 1510 × 670 × 650 | 1110 × 720 × 650 |
| Shay | Cutubka | RFPM6033U | RFPM8033U | RFPM6038U | RFPM8038U |
| Kala duwanaanshaha habaynta |
|
|
|
|
|
| Safarka dhidibka X/Y/Z | mm | 6200/3700/1000 | 8500/3700/1000 | 6200/4200/1000 | 8500/4200/1000 |
| Kala duwanaanshaha wareegga dhidibka A/C | ° | ±105/±360 | ±105/±360 | ±105/±360 | ±105/±360 |
| Ballac wax ku ool ah oo Gantry ah | mm | 3300 | 3300 | 3800 | 3800 |
| Masaafada u dhaxaysa sanka dunduleelka ilaa miiska shaqada | mm | 200-1200 | 200-1200 | 200-1200 | 200-1200 |
| Miiska Shaqada |
|
|
|
|
|
| Cabbirrada miiska shaqada | mm | 2500 × 6000 | 2500 × 8000 | 3000 × 6000 | 3000 × 8000 |
| Awoodda culeyska sita ee miiska shaqada | t | 30 | 35 | 35 | 40 |
| Tilmaamaha T-slot | mm | 28 | 28 | 28 | 28 |
| Quudinta wadista |
|
|
|
|
|
| Xawaaraha ugu badan ee quudinta X/Y/Z | m/daqiiqad | 8/10/10 | 8/10/10 | 8/10/10 | 8/10/10 |
| Xawaaraha ugu badan ee quudinta A/C | rpm | 60 | 60 | 60 | 60 |
| Xawaaraha degdega ah X/Y/Z | m/daqiiqad | 12/15/15 | 10/15/15 | 12/15/15 | 10/15/15 |
| A/C-ga xawaaraha degdega ah | rpm | 100 | 100 | 100 | 100 |
| Spindle |
|
|
|
|
|
| Habka wadista |
| Isteerinka korontada | Isteerinka korontada | Isteerinka korontada | Isteerinka korontada |
| Xawaaraha ugu badan ee wareegga | rpm | 7000 | 7000 | 7000 | 7000 |
| Awoodda isbaarada (S1/S6-40%) | Kw | 50/60 | 50/60 | 50/60 | 50/60 |
| Wareegga isbaarada (S1/S6-40%) | Nm | 318/382 | 318/382 | 318/382 | 318/382 |
| Isgoyska |
| HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 |
| Joornaalka Qalabka (ikhtiyaar) |
|
|
|
|
|
| Awoodda majaladda qalabka | T | 24 | 24 | 24 | 24 |
| Nooca hayaha qalabka |
| HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 |
| Dhexroorka ugu badan ee qalabka | mm | ф110/ф200 | ф110/ф200 | ф110/ф200 | ф110/ф200 |
| Dhererka ugu badan ee qalabka | mm | 350 | 350 | 350 | 350 |
| Miisaanka ugu badan ee qalabka | kg | 20 | 20 | 20 | 20 |
| Saxnaanta |
|
|
|
|
|
| Saxnaanta booska X/Y/Z | mm | 0.028/0.018/0.014 | 0.032/0.018/0.014 | 0.028/0.024/0.014 | 0.032/0.024/0.014 |
| Ku celcelinta X/Y/Z | mm | 0.018/0.012/0.010 | 0.020/0.012/0.010 | 0.018/0.016/0.010 | 0.020/0.016/0.010 |
| Kuwa kale |
|
|
|
|
|
| Miisaanka mashiinka | t | 84 | 100 | 94 | 115 |
| Cabbirka mashiinka (L × W × H) | cm | 1550 × 720 × 650 | 2050 × 720 × 650 | 1550 × 800 × 650 | 2050 × 800 × 650 |
Taxanahan alaabtu waa xarun makiinado shan-dhidible ah oo iskeed u horumarsan oo leh qaab-dhismeed is haysta, waxqabad aad u fiican, xawaare sare, saxnaan sare, adkeysi sare, iwm. Waxay ku habboon tahay qaybaha makiinado ee warshado kala duwan sida hawada sare, mishiinnada injineernimada, gaadiidka tareenka, caaryada saxda ah, tamarta dabaysha, iwm.
Taxanaha PM-U
Waxay qaadataa madax laba jibbaaran oo A/C ah oo xawaare sare leh iyo madax sax ah, waxayna ku qalabaysan tahay isteerin koronto oo awood sare leh iyo mid xoog badan leh, kaas oo leh awood jaritaan oo xooggan.
Madaxa labajibbaaran ee A/C
Waxay qaadataa madaxyo laba-laab ah oo sax ah oo la soo dhoofiyo, firfircoon oo sare leh, waxayna ku qalabaysan tahay isteerin koronto oo xawaare sare leh, oo buuxinaysa shuruudaha sare ee saxnaanta qaybaha, tayada dusha sare, iyo hufnaanta habaynta.
Naqshadeynta qaab-dhismeedka adag ee sare
Hababka naqshadeynta curiyayaasha kama dambaysta ah waxaa loo isticmaalaa in lagu sameeyo falanqayn joogto ah iyo mid qaabaysan oo ku saabsan qaybaha kala duwan ee mashiinka si loo sii wanaajiyo qaab-dhismeedka badeecada loona gaaro naqshad dhisme oo adag oo fudud.
Qaab-dhismeedka taageerada kaabayaasha ah ee boolal
Boorka hogaanka safarka dheer waxaa ku qalabaysan taageero sabeynaysa, taas oo si wax ku ool ah u hagaajin karta xawaaraha xadka ee boolka hogaanka iyo xasilloonida wareegga xawaaraha sare.
Joornaalka Qalabka
Noocyo kala duwan oo joornaalo qalab ah, 24/32/40/60, ayaa diyaar u ah in si wax ku ool ah loo soo gaabiyo saacadaha shaqada ee dheeraadka ah.
Taageero adag oo sare
Sariirta mashiinka waxaa ku qalabaysan saddex hage oo cabbirkoodu weyn yahay, kuwaas oo bixiya taageero ku filan oo adag iyo haynta saxda ah.
Naqshadeynta badbaadada aadanaha
Naqshadda birta xaashida ah ee ku taal salka miiska shaqada waxay ka hortagtaa jajabyada birta ah inay galaan sariirta mashiinka. Meesha lagu dhex daro ee laga saaro jajabka ayaa si aasaasi ah u baabi'isa dhibaatada daadashada biyaha.
| Shay | Cutubka | RFPM3028U | RFPM4028U | RFPM6028U | RFPM4033U |
| Kala duwanaanshaha habaynta | |||||
| Safarka dhidibka X/Y/Z | mm | 3200/3200/1000 | 4200/3200/1000 | 6200/3200/1000 | 4200/3700/1000 |
| Kala duwanaanshaha wareegga dhidibka A/C | ° | ±105/±360 | ±105/±360 | ±105/±360 | ±105/±360 |
| Ballac wax ku ool ah oo Gantry ah | mm | 2800 | 2800 | 2800 | 3300 |
| Masaafada u dhaxaysa sanka dunduleelka ilaa miiska shaqada | mm | 200-1200 | 200-1200 | 200-1200 | 200-1200 |
| Miiska Shaqada | |||||
| Cabbirrada miiska shaqada | mm | 2000 × 3000 | 2000 × 4000 | 2000 × 6000 | 2500 × 4000 |
| Awoodda culeyska sita ee miiska shaqada | t | 16 | 20 | 26 | 22 |
| Tilmaamaha T-slot | mm | 28 | 28 | 28 | 28 |
| Quudinta wadista | |||||
| Xawaaraha ugu badan ee quudinta X/Y/Z | m/daqiiqad | 12/12/12 | 12/12/12 | 12/12/12 | 10/10/10 |
| Xawaaraha ugu badan ee quudinta A/C | rpm | 60 | 60 | 60 | 60 |
| Xawaaraha degdega ah X/Y/Z | m/daqiiqad | 20/20/15 | 20/20/15 | 15/20/15 | 15/15/15 |
| A/C-ga xawaaraha degdega ah | rpm | 100 | 100 | 100 | 100 |
| Spindle | |||||
| Habka wadista | Isteerinka korontada | Isteerinka korontada | Isteerinka korontada | Isteerinka korontada | |
| Xawaaraha ugu badan ee wareegga | rpm | 7000 | 7000 | 7000 | 7000 |
| Awoodda isbaarada (S1/S6) | Kw | 50/60 | 50/60 | 50/60 | 50/60 |
| Wareegga isbaarada (S1/S6) | Nm | 318/382 | 318/382 | 318/382 | 318/382 |
| Isgoyska | HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 | |
| Joornaalka Qalabka (ikhtiyaar) | |||||
| Awoodda majaladda qalabka | T | 24 | 24 | 24 | 24 |
| Nooca hayaha qalabka | HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 | |
| Dhexroorka ugu badan ee qalabka | mm | ф110/ф200 | ф110/ф200 | ф110/ф200 | ф110/ф200 |
| Dhererka ugu badan ee qalabka | mm | 350 | 350 | 350 | 350 |
| Miisaanka ugu badan ee qalabka | kg | 20 | 20 | 20 | 20 |
| Saxnaanta | |||||
| Saxnaanta booska X/Y/Z | mm | 0.018/0.018/0.014 | 0.020/0.018/0.014 | 0.028/0.018/0.014 | 0.020/0.018/0.014 |
| Ku celcelinta X/Y/Z | mm | 0.012/0.012/0.010 | 0.012/0.012/0.010 | 0.018/0.012/0.010 | 0.012/0.012/0.010 |
| Kuwa kale | |||||
| Miisaanka mashiinka | t | 57 | 63 | 75 | 70 |
| Cabbirka mashiinka (L × W × H) | cm | 910×670×650 | 1110 × 670 × 650 | 1510 × 670 × 650 | 1110 × 720 × 650 |
| Shay | Cutubka | RFPM6033U | RFPM8033U | RFPM6038U | RFPM8038U |
| Kala duwanaanshaha habaynta | |||||
| Safarka dhidibka X/Y/Z | mm | 6200/3700/1000 | 8500/3700/1000 | 6200/4200/1000 | 8500/4200/1000 |
| Kala duwanaanshaha wareegga dhidibka A/C | ° | ±105/±360 | ±105/±360 | ±105/±360 | ±105/±360 |
| Ballac wax ku ool ah oo Gantry ah | mm | 3300 | 3300 | 3800 | 3800 |
| Masaafada u dhaxaysa sanka dunduleelka ilaa miiska shaqada | mm | 200-1200 | 200-1200 | 200-1200 | 200-1200 |
| Miiska Shaqada | |||||
| Cabbirrada miiska shaqada | mm | 2500 × 6000 | 2500 × 8000 | 3000 × 6000 | 3000 × 8000 |
| Awoodda culeyska sita ee miiska shaqada | t | 30 | 35 | 35 | 40 |
| Tilmaamaha T-slot | mm | 28 | 28 | 28 | 28 |
| Quudinta wadista | |||||
| Xawaaraha ugu badan ee quudinta X/Y/Z | m/daqiiqad | 8/10/10 | 8/10/10 | 8/10/10 | 8/10/10 |
| Xawaaraha ugu badan ee quudinta A/C | rpm | 60 | 60 | 60 | 60 |
| Xawaaraha degdega ah X/Y/Z | m/daqiiqad | 12/15/15 | 10/15/15 | 12/15/15 | 10/15/15 |
| A/C-ga xawaaraha degdega ah | rpm | 100 | 100 | 100 | 100 |
| Spindle | |||||
| Habka wadista | Isteerinka korontada | Isteerinka korontada | Isteerinka korontada | Isteerinka korontada | |
| Xawaaraha ugu badan ee wareegga | rpm | 7000 | 7000 | 7000 | 7000 |
| Awoodda isbaarada (S1/S6-40%) | Kw | 50/60 | 50/60 | 50/60 | 50/60 |
| Wareegga isbaarada (S1/S6-40%) | Nm | 318/382 | 318/382 | 318/382 | 318/382 |
| Isgoyska | HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 | |
| Joornaalka Qalabka (ikhtiyaar) | |||||
| Awoodda majaladda qalabka | T | 24 | 24 | 24 | 24 |
| Nooca hayaha qalabka | HSK-A100 | HSK-A100 | HSK-A100 | HSK-A100 | |
| Dhexroorka ugu badan ee qalabka | mm | ф110/ф200 | ф110/ф200 | ф110/ф200 | ф110/ф200 |
| Dhererka ugu badan ee qalabka | mm | 350 | 350 | 350 | 350 |
| Miisaanka ugu badan ee qalabka | kg | 20 | 20 | 20 | 20 |
| Saxnaanta | |||||
| Saxnaanta booska X/Y/Z | mm | 0.028/0.018/0.014 | 0.032/0.018/0.014 | 0.028/0.024/0.014 | 0.032/0.024/0.014 |
| Ku celcelinta X/Y/Z | mm | 0.018/0.012/0.010 | 0.020/0.012/0.010 | 0.018/0.016/0.010 | 0.020/0.016/0.010 |
| Kuwa kale | |||||
| Miisaanka mashiinka | t | 84 | 100 | 94 | 115 |
| Cabbirka mashiinka (L × W × H) | cm | 1550 × 720 × 650 | 2050 × 720 × 650 | 1550 × 800 × 650 | 2050 × 800 × 650 |
Qaybaha alaabta
-
Xarunta Mashiinka CNC ee Taxanaha VC ee Adkaanta Sare...
-
Tilmaamaha Toosan ee Taxanaha HP Taxanaha Jiifka ah ee Dhaqaaqaya Tiirka...
-
Tilmaamaha Toosan ee Tiirka HT ee Jiifka ah ee Dhaqaaqa...
-
VS Taxanaha Afar-track Culus ee CNC Machining C ...
-
Xarunta Mashiinka CNC ee Taxanaha V oo leh Adkayn Sare
-
Xarunta Mashiinka CNC ee Taxanaha X ee Laba-geeska ah
-
Xarunta Mashiinka CNC ee 5-dhidibka Jiifka ah TKG1600
-
Cent-ka CNC ee toosan ee leexashada iyo shiididda...
-
Xarunta Mashiinka CNC Xawaaraha Sare Taxanaha GM
-
Taxanaha CNC ee Xawaaraha Sare
-
Lathe CNC oo laba-laab ah SK32
-
Xarunta Mashiinka Toosan ee CNC RFTV510 ee loogu talagalay Giraangiraha...