Xarunta Mashiinka Jiifka ah ee Shan-dhidibka ah Taxanaha CP
Fiidiyowga Badeecada
Habaynta Badeecada
Astaamaha
Qaab-dhismeedka Tallaabooyinka X-dhidibka
Farqiga dhererka ee diyaaradda rakibidda ee hagaha toosan ee X-axis
tareenka wuxuu hubiyaa in xaaladda xoogga ee tareenka hagaha ahi ay wanaagsan tahay.
Borotiin Godan
Qaboojinta boolal godan waxay hubineysaa xawaare sare
hawlgalka mashiinka si loo ilaaliyo saxnaanta xasilloon.
Fuselage Adkayn Sare
Sariirta isku dhafan ee hore iyo gadaal waxay hagaajisaa adkaanta sariirta dhexe ee mashiinka cnc ee toosan, sidaas darteed
hubinta xasilloonida habaynta.
X, Y, Z Dhammaantood waa Tilmaamaha Rullaluistemaadka Toosan
Dhinacyada X, Y, Z dhammaantood waa hagayaal toosan oo duuban, sidaas darteed, saxnaan sare
jarista culus waa la ogaan karaa.
Xarunta mashiinka CNC ee 5-axis waa X, Y, Z dhidibka Waa Allinear Roller Guide
Si loo gaaro saxnaan sare iyo rogid culus, dhidibka X, Y, iyo Z dhammaantood waxay isticmaalayaan hagaha duubista toosan
45° hal dhidibSbaalHmadaxa
1 Xagalka leexashadu waa weyn yahay, wuxuu noqon karaa xagasha -30°-180° ee farsamaynta shaqada, oo ku habboon farsamaynta qaybaha hawada sare.
2 Qaabeynta madaxa ruxitaanka gacanta ee A63 waxay noqon kartaaku habboon habaynta qaybaha isku dhafan ee baabuurta.
DhaqaaqiddaCrossbeamSqaab-dhismeedka, dhidibka ZDlaba jibbaaranSshaqaalahaMoveSisla markiiba
1 Sariirta/tiirka/alwaaxdu waxay ka samaysan yihiin walxo bir ah oo cawlan, waxayna si wax ku ool ah u nuugi karaan gariirka iyada oo loo marayoqaab-dhismeedka garaafiga caadiga ah, qaab-dhismeed yar, xoog dhisme oo aad u fiican iyo adkaansho.
2 Qaybaha dhaqaaqa waxaa laga sameeyay bir, si loo hubiyo xawaaraha fudud oo dhaqso u socda (≥60m/daqiiqo), hufnaan sare oo wax soo saar ah.
3 X/Y/Z dhidibka (≥1700mm), oo ku habboon qaybaha waaweyn ee wax lagu farsameeyo
SaxnaantaClaambadTawood u leh
Qalabka rogidda shaft-ka C CAM si loo baabi'iyo nadiifinta, sihubi in xarunta mashiinka toosan ee CNC ee 5-axis ay saxnaan sare iyo hufnaan sare leedahay
Boorsooyinka Hollows-ka
Qaboojinta boolal god leh waxay hubisaa hawlgalka xawaaraha sare ee mashiinka si loo ilaaliyo saxnaanta xasilloon
P1 45°SislingAxisSbaalHmadaxa
Qaab-dhismeedka adag ee sare
Kala duwanaansho ballaaran oo wax lagu farsameeyo ayaa yareyn karta isku-xidhka soo noqnoqda ee qaybaha shaqada waxayna hagaajin kartaa saxnaanta iyo hufnaanta habaynta
La qabsi wax ku ool ah oo heer sare ah, xulasho laba-dhidible oo caalami ah ayaa ballaarisa waxqabadka mashiinka, taas oo la mid ah ku darista dhidib gaar ah. Xitaa qaar ka mid ah shaqooyinka waaweyn ee aan si fudud loo rogi karin ama ka fog shuruudaha saxda ah, way ka waxtar badan tahay ku darista dhidibka afraad.
P2 Dlaba jibbaaranSholderHbarigaSbaalHmadaxa
Soo-saareyaasha A-waxaa si toos ah u wada matoor xawaare hoose leh oo leh tiirar sare, iyada oo aan lahayn caqabado, saxnaan sare, iyo waxqabad jawaab celin firfircoon oo wanaagsan
Saliidda A-saliiddu waxay qaadataa qabsatooyin haydarooli ah, kuwaas oo leh awood isku xidhid oo xooggan iyo cimri dheer. Qaab yar iyo ficil la isku halleyn karo
Qalabka xadka xagasha gaarka ah wuxuu ka dhigayaa xakamaynta madaxa madaxa ee 5-axis CNC mid fudud.
Saxnaanta sare ee fiilada korontada, nadiifinta weyn ee sita iyo adkaanta sare.
LaysarkaToolSettingIqalab
Si dhakhso ah oo sax ah u ogaanshaha cabbirka qalabka si loo hubiyo isticmaalka muddada dheer iyada oo aan la xirin
OnlineDdoorashadaSnidaam
yaree dejinta qalabka xarunta mashiinka CNC ee toosan iyo waqtiga isku-dubaridka shaqada, oo badbaadi 90% waqtiga dheeraadka ah.
SaliidMwaaGateringSnidaam
Puri saresheeko-xariireedheerka kation, hawlgalka deggan, buuqa aamusanfloor. Si wax ku ool ahfiKu rid qiiqa hawada iyo qiiqa saliidda ee biyaha ku milma goobta shaqada oo si qoto dheer u nadiifi hawada.
WareejintaFluidCoolingDbaarkin
Nidaamku wuxuu hubin karaa kor u kaca heerkulka leexashadaflheerkulka gudaha 3-5℃.
AxialGqiimeyntaRuler
Calaamadda wax soo saarka ee la cabbiray waa garaaca dhijitaalka ah, kaas oo leh astaamo kala duwan oo ogaanshaha ballaaran, saxnaanta ogaanshaha sare iyo xawaaraha jawaab celinta degdegga ah.
Xarunta Mashiinka Jiifka ah ee CNC oo Shan-dhidib leh oo JabanQalab DdoorashadaIn The Joornaalka
Qalabka ogaanshaha waxaa lagu rakibay qalabkamajalad, habka ogaanshaha iyo habka farsamaynta ayaa isku mar la sameeyaa, iyada oo aan saameyn ku yeelan garaaca farsamaynta.
Miisaska Shaqada
Heerka Caadiga ahRdhulSsaldhiga isngleWorkbench
Miiska wareega oo leh gudbinta kamaradda duubista
Waxtar sare, dib-u-dhac la'aan, dayactir la'aan, adkeysi sare iyo culays culus.
Miiska wareega oo leh cutubka tusmada ugu yar ee 0.001°
Ikhtiyaar ahDlaba jibbaaranEisbeddelkaDlaba jibbaaranSxarunWorkbench
Xidhiidhka ka dhexeeya jidhka miiska shaqada iyo baaldiga waxaa lagu adkeeyaa koon 4-dhibcood ah iyadoo la adeegsanayo xoogga isku xidhka baaldiga.
Xoogga isku xidhka miiska shaqada wuxuu ilaaliyaa habaynta xasilloon ee leexashada culus.
ATC
Waxaa loo isticmaali karaa bar dheer oo caajis ah iyo bir bir ah oo dhexroor weyn leh si loo hagaajiyo waxtarka wax soo saarka.
Qalabka beddelka qalabka fudud laakiin aadka loogu kalsoonaan karo ee kamaradda ku shaqeeya
waxay xaqiijin kartaa isbeddel degdeg ah oo qalab ah iyo xasillooni muddo dheer ah
Hawlgalka lagu yareynayo waqtiga aan la rogin.
Tilmaamaha Farsamada
| Mashruuc | Cutubka | CP800 | CP800T2 | |
| Safar | Safarka dhidibka X/Y/Z | mm | 800x800x750 | 800x800x750 |
| Safarka dhidibka B | -30°-160° | -30°-160° | ||
| Safarka dhidibka C | 360° | 360° | ||
| Masaafada u dhaxaysa dunduleelka ilaa dusha miiska (dhidibka B 90 darajo oo jiifa) | mm | 290-1040 | 160-910 | |
| Masaafada u dhaxaysa dunduleelka ilaa dusha miiska (dhidibka B 0 darajo oo toosan) | mm | 47-797 | -83-667 | |
| Masaafada u dhaxaysa dunduleelka ilaa bartamaha miiska (dhidibka B 90 darajo oo jiif ah) | mm | -135-665 | -135-665 | |
| Masaafada u dhaxaysa dunduleelka ilaa bartamaha miiska (dhidibka B 0 darajo oo toosan) | mm | 108-908 | 108-908 | |
| Kala duwanaanshaha ugu badan ee habaynta | mm | φ720*910 | φ720*910 | |
| Quudinta saddex-dhidibka | Barakac degdeg ah oo dhidibka X/Y/Z ah | m/daqiiqad | 60/60/60 | 60/60/60 |
| Xawaaraha quudinta oo la jaray | mm/daqiiqad | 0-24000 | 0-24000 | |
| Miiska wareega (dhidibka C) | Tirada miisaska shaqada | 1 | 2 | |
| Dhexroorka saxanka | mm | φ650 | 500*500 | |
| Culays la oggol yahay | kg | 500 | 500 | |
| Xawaaraha ugu badan ee wareegga | rmp | 40 | 40 | |
| Saxnaanta booska/ku celcelinta | arc.sec | 15/10 | 15/10 | |
| dhidibka B | Xawaaraha ugu badan ee wareegga | rmp | 60 | 60 |
| Saxnaanta booska/ku celcelinta | arc.sec | 8/4 | 8/4 | |
| Spindle | Tilmaamaha Spindle-ka (dhexroorka rakibidda/qaabka gudbinta) | mm | 190/Ku dhex jira | 190/Ku dhex jira |
| Isgoyska | mm | A63 | A63 | |
| Xawaaraha ugu badan ee dunmiiqa | r/daqiiqad | 18000 | 18000 | |
| Awoodda matoorka isbaarada (joogto ah/S640%) | kW | 30/35 | 30/35 | |
| Dhaqdhaqaaqa matoorka isbaarada (joogto ah/S640%) | Nm | 72/85 | 72/85 | |
| Joornaalka Qalabka | Awoodda majaladda qalabka | 50T | 50T | |
| Waqtiga beddelka qalabka (TT) | S | 7 | 7 | |
| Dhexroorka qalabka ugu badan (qalab buuxa/qalab madhan) | mm | 80/150 | 80/150 | |
| Dhererka qalabka ugu badan | Mm | 450 | 450 | |
| Miisaanka qalabka ugu badan | kg | 8 | 8 | |
| Gtareenka uide | Tareenka hagaha ee dhidibka X (cabbirka/tirada bogagga) | mm | 45/2 | 45/2 |
| Tareenka hagaha ee dhidibka Y (cabirka/tirada bogagga) | mm | 45/3 | 45/3 | |
| Tareenka hagaha ee dhidibka Z (cabirka/tirada bogagga) | mm | 45/2 | 45/2 | |
| TGudbinta dhidibka hree-axis | Boolul X-dhidibka ah | N | 2R40x20 | 2R40x20 |
| Boolal dhidibka Y ah | N | 2R40x20 | 2R40x20 | |
| Boolal dhidibka Z-dhidibka ah | N | 2R40x20 | 2R40x20 | |
| TSaxnaanta dhidibka hree | Saxnaanta booska | mm | ±0.005/300 | ±0.005/300 |
| Saxnaanta booska ku celcelinta | mm | ±0.003/300 | ±0.003/300 | |
| Nidaamka saliidaynta | Awoodda cutubka saliidda | L | 0.7 | 0.7 |
| Nooca saliidaynta | Saliidaynta dufanka | Saliidaynta dufanka | ||
| Kale | Shuruudaha hawada | kg/cm² | ≥6 | ≥6 |
| Socodka isha hawada | mm³/daqiiqad | ≥0.5 | ≥0.5 | |
| Miisaanka mashiinka | KG | 10.5 | 11 | |
| Mashruuc | Cutubka | CP1100 | CP1100T2 | |
| Safar | Safarka dhidibka X/Y/Z | mm | 980x1140x680 | 980x1140x500 |
| Safarka dhidibka B | -30°-180° | -30°-180° | ||
| Safarka dhidibka C | 360° | 360° | ||
| Masaafada u dhaxaysa dunduleelka ilaa dusha miiska (dhidibka B 90 darajo oo jiifa) | mm | 100-780 | 100-600 | |
| Masaafada u dhaxaysa dunduleelka ilaa dusha miiska (dhidibka B 0 darajo oo toosan) | mm | 0-680 | 0-500 | |
| Masaafada u dhaxaysa dunduleelka ilaa bartamaha miiska (dhidibka B 90 darajo oo jiif ah) | mm | -260-720 | -260-720 | |
| Masaafada u dhaxaysa dunduleelka ilaa bartamaha miiska (dhidibka B 0 darajo oo toosan) | mm | -160-820 | -160-820 | |
| Kala duwanaanshaha ugu badan ee habaynta | mm | φ1120*780 | φ1120*600 | |
| Quudinta saddex-dhidibka | Barakac degdeg ah oo dhidibka X/Y/Z ah | m/daqiiqad | 60/60/60 | 60/60/60 |
| Xawaaraha quudinta oo la jaray | mm/daqiiqad | 0-24000 | 0-24000 | |
| Miiska wareega (dhidibka C) | Tirada miisaska shaqada | 1 | 2 | |
| Dhexroorka saxanka | mm | φ800 | 630*630 | |
| Culays la oggol yahay | kg | 1200 | 1000 | |
| Xawaaraha ugu badan ee wareegga | rmp | 30 | 30 | |
| Saxnaanta booska/ku celcelinta | arc.sec | 15/10 | 15/10 | |
| dhidibka B | Xawaaraha ugu badan ee wareegga | rmp | 50 | 50 |
| Saxnaanta booska/ku celcelinta | arc.sec | 8/4 | 8/4 | |
| Spindle | Tilmaamaha Spindle-ka (dhexroorka rakibidda/qaabka gudbinta) | mm | 230/Ku dhex jira | 230/Ku dhex jira |
| Isgoyska | mm | A100 | A100 | |
| Xawaaraha ugu badan ee dunmiiqa | r/daqiiqad | 10000 | 10000 | |
| Awoodda matoorka isbaarada (joogto ah/S640%) | kW | 54/65 | 54/65 | |
| Dhaqdhaqaaqa matoorka isbaarada (joogto ah/S640%) | Nm | 200/230 | 200/230 | |
| Joornaalka Qalabka | Awoodda majaladda qalabka | 50T | 50T | |
| Waqtiga beddelka qalabka (TT) | S | 8 | 8 | |
| Dhexroorka qalabka ugu badan (qalab buuxa/qalab madhan) | mm | 120/240 | 120/240 | |
| Dhererka qalabka ugu badan | Mm | 450 | 450 | |
| Miisaanka qalabka ugu badan | kg | 15 | 15 | |
| Gtareenka uide | Tareenka hagaha ee dhidibka X (cabbirka/tirada bogagga) | mm | 55/2 | 55/2 |
| Tareenka hagaha ee dhidibka Y (cabirka/tirada bogagga) | mm | 55/3 | 55/3 | |
| Tareenka hagaha ee dhidibka Z (cabirka/tirada bogagga) | mm | 55/2 | 55/2 | |
| TGudbinta dhidibka hree-axis | Boolul X-dhidibka ah | N | 2R50x20 | 2R50x20 |
| Boolal dhidibka Y ah | N | 2R50x20 | 2R50x20 | |
| Boolal dhidibka Z-dhidibka ah | N | 2R50x20 | 2R50x20 | |
| TSaxnaanta dhidibka hree | Saxnaanta booska | mm | 0.005/300 | 0.005/300 |
| Saxnaanta booska ku celcelinta | mm | 0.003/300 | 0.003/300 | |
| Nidaamka saliidaynta | Awoodda cutubka saliidda | L | 0.7 | 0.7 |
| Nooca saliidaynta | Saliidaynta dufanka | Saliidaynta dufanka | ||
| Kale | Shuruudaha hawada | kg/cm² | ≥6 | ≥6 |
| Socodka isha hawada | mm³/daqiiqad | ≥0.5 | ≥0.5 | |
| Miisaanka mashiinka | KG | 23 | 24 | |
| Mashruuc | Cutubka | CP1600 | CP1600T2 | |
| Safar | Safarka dhidibka X/Y/Z | mm | 1550x1540x1115 | 1550x1540x940 |
| Safarka dhidibka B | -30°-180° | -30°-180° | ||
| Safarka dhidibka C | 360° | 360° | ||
| Masaafada u dhaxaysa dunduleelka ilaa dusha miiska (dhidibka B 90 darajo oo jiifa) | mm | 100-1215 | 100-1040 | |
| Masaafada u dhaxaysa dunduleelka ilaa dusha miiska (dhidibka B 0 darajo oo toosan) | mm | 0-1115 | 0-940 | |
| Masaafada u dhaxaysa dunduleelka ilaa bartamaha miiska (dhidibka B 90 darajo oo jiif ah) | mm | -160-1290 | -160-1290 | |
| Masaafada u dhaxaysa dunduleelka ilaa bartamaha miiska (dhidibka B 0 darajo oo toosan) | mm | -60-1390 | -60-1390 | |
| Kala duwanaanshaha ugu badan ee habaynta | mm | φ1490*1215 | φ1490*1040 | |
| Quudinta saddex-dhidibka | Barakac degdeg ah oo dhidibka X/Y/Z ah | m/daqiiqad | 42/42/42 | 42/42/42 |
| Xawaaraha quudinta oo la jaray | mm/daqiiqad | 0-24000 | 0-24000 | |
| Miiska wareega (dhidibka C) | Tirada miisaska shaqada | 1 | 2 | |
| Dhexroorka saxanka | mm | φ1200 | 800*800 | |
| Culays la oggol yahay | kg | 2000 | 1800 | |
| Xawaaraha ugu badan ee wareegga | rmp | 20 | 20 | |
| Saxnaanta booska/ku celcelinta | arc.sec | 15/10 | 15/10 | |
| dhidibka B | Xawaaraha ugu badan ee wareegga | rmp | 50 | 50 |
| Saxnaanta booska/ku celcelinta | arc.sec | 8/4 | 8/4 | |
| Spindle | Tilmaamaha Spindle-ka (dhexroorka rakibidda/qaabka gudbinta) | mm | 230/Ku dhex jira | 230/Ku dhex jira |
| Isgoyska | mm | A100 | A100 | |
| Xawaaraha ugu badan ee dunmiiqa | r/daqiiqad | 10000 | 10000 | |
| Awoodda matoorka isbaarada (joogto ah/S640%) | kW | 54/65 | 54/65 | |
| Dhaqdhaqaaqa matoorka isbaarada (joogto ah/S640%) | Nm | 200/230 | 200/230 | |
| Joornaalka Qalabka | Awoodda majaladda qalabka | 50T | 50T | |
| Waqtiga beddelka qalabka (TT) | S | 8 | 8 | |
| Dhexroorka qalabka ugu badan (qalab buuxa/qalab madhan) | mm | 120/240 | 120/240 | |
| Dhererka qalabka ugu badan | Mm | 450 | 450 | |
| Miisaanka qalabka ugu badan | kg | 15 | 15 | |
| Gtareenka uide | Tareenka hagaha ee dhidibka X (cabbirka/tirada bogagga) | mm | 65/2 | 65/2 |
| Tareenka hagaha ee dhidibka Y (cabirka/tirada bogagga) | mm | 55/3 | 55/3 | |
| Tareenka hagaha ee dhidibka Z (cabirka/tirada bogagga) | mm | 55/2 | 55/2 | |
| TGudbinta dhidibka hree-axis | Boolul X-dhidibka ah | N | 55x16 | 55x16 |
| Boolal dhidibka Y ah | N | 55x16 | 55x16 | |
| Boolal dhidibka Z-dhidibka ah | N | 2R50x20 | 2R50x20 | |
| TSaxnaanta dhidibka hree | Saxnaanta booska | mm | 0.005/300 | 0.005/300 |
| Saxnaanta booska ku celcelinta | mm | 0.003/300 | 0.003/300 | |
| Nidaamka saliidaynta | Awoodda cutubka saliidda | L | 0.7 | 0.7 |
| Nooca saliidaynta | Saliidaynta dufanka | Saliidaynta dufanka | ||
| Kale | Shuruudaha hawada | kg/cm² | ≥6 | ≥6 |
| Socodka isha hawada | mm³/daqiiqad | ≥0.5 | ≥0.5 | |
| Miisaanka mashiinka | KG | 30 | 31 | |
| Mashruuc | Cutubka | CP2000 | CPCP2000V2V | |
| Safar | Safarka dhidibka X/Y/Z | mm | 2000x1700x1400 | 1700x1750x1700 |
| Safarka dhidibka B | -30°-180° | -30°-160° | ||
| Safarka dhidibka C | 360° | 0-360° | ||
| Masaafada u dhaxaysa dunduleelka ilaa dusha miiska (dhidibka B 90 darajo oo jiifa) | mm | 100-1500 | -43-1657 | |
| Masaafada u dhaxaysa dunduleelka ilaa dusha miiska (dhidibka B 0 darajo oo toosan) | mm | 0-1400 | 200-1900 | |
| Masaafada u dhaxaysa dunduleelka ilaa bartamaha miiska (dhidibka B 90 darajo oo jiif ah) | mm | -1000-1000 | -57-1643 | |
| Masaafada u dhaxaysa dunduleelka ilaa bartamaha miiska (dhidibka B 0 darajo oo toosan) | mm | -900-1100 | -300-1400 | |
| Kala duwanaanshaha ugu badan ee habaynta | mm | φ1680*1500 | φ1700*1900 | |
| Quudinta saddex-dhidibka | Barakac degdeg ah oo dhidibka X/Y/Z ah | m/daqiiqad | 60/60/60 | 60/90/90 |
| Xawaaraha quudinta oo la jaray | mm/daqiiqad | 0-24000 | 0-24000 | |
| Miiska wareega (dhidibka C) | Tirada miisaska shaqada | 1 | 1 | |
| Dhexroorka saxanka | mm | φ1600 | 800*800 | |
| Culays la oggol yahay | kg | 3000 | 1500 | |
| Xawaaraha ugu badan ee wareegga | rmp | 20 | 60 | |
| Saxnaanta booska/ku celcelinta | arc.sec | 10/6 | 8/4 | |
| dhidibka B | Xawaaraha ugu badan ee wareegga | rmp | 50 | 60 |
| Saxnaanta booska/ku celcelinta | arc.sec | 8/4 | 8/4 | |
| Spindle | Tilmaamaha Spindle-ka (dhexroorka rakibidda/qaabka gudbinta) | mm | 230/Ku dhex jira | 190/Ku dhex jira |
| Isgoyska | mm | A100 | A63 | |
| Xawaaraha ugu badan ee dunmiiqa | r/daqiiqad | 10000 | 18000 | |
| Awoodda matoorka isbaarada (joogto ah/S640%) | kW | 54/65 | 30/35 | |
| Dhaqdhaqaaqa matoorka isbaarada (joogto ah/S640%) | Nm | 200/230 | 70/85 | |
| Joornaalka Qalabka | Awoodda majaladda qalabka | 50T | 50T | |
| Waqtiga beddelka qalabka (TT) | S | 8 | 7 | |
| Dhexroorka qalabka ugu badan (qalab buuxa/qalab madhan) | mm | 120/240 | 80/150 | |
| Dhererka qalabka ugu badan | Mm | 450 | 450 | |
| Miisaanka qalabka ugu badan | kg | 15 | 8 | |
| Gtareenka uide | Tareenka hagaha ee dhidibka X (cabbirka/tirada bogagga) | mm | 55/3 | 55/3 |
| Tareenka hagaha ee dhidibka Y (cabirka/tirada bogagga) | mm | 45/3 | 45/3 | |
| Tareenka hagaha ee dhidibka Z (cabirka/tirada bogagga) | mm | 55/2 | 55/2 | |
| TGudbinta dhidibka hree-axis | Boolul X-dhidibka ah | N | 63×25 | 63×25 |
| Boolal dhidibka Y ah | N | 50 × 25 | 50 × 32 | |
| Boolal dhidibka Z-dhidibka ah | N | 50 * 25 * 2 | 50 * 32 * 2 | |
| TSaxnaanta dhidibka hree | Saxnaanta booska | mm | 0.005/300 | 0.005/300 |
| Saxnaanta booska ku celcelinta | mm | 0.003/300 | 0.003/300 | |
| Nidaamka saliidaynta | Awoodda cutubka saliidda | L | 0.7 | 0.7 |
| Nooca saliidaynta | Saliidaynta dufanka | Saliidaynta dufanka | ||
| Kale | Shuruudaha hawada | kg/cm² | ≥6 | ≥6 |
| Socodka isha hawada | mm³/daqiiqad | ≥0.5 | ≥0.5 | |
| Miisaanka mashiinka | KG | 42 | 42 | |
Qaab-dhismeedka Tallaabooyinka X-dhidibka
Farqiga dhererka ee diyaaradda rakibidda ee hagaha toosan ee X-axis
tareenka wuxuu hubiyaa in xaaladda xoogga ee tareenka hagaha ahi ay wanaagsan tahay.
Borotiin Godan
Qaboojinta boolal godan waxay hubineysaa xawaare sare
hawlgalka mashiinka si loo ilaaliyo saxnaanta xasilloon.
Fuselage Adkayn Sare
Sariirta isku dhafan ee hore iyo gadaal waxay hagaajisaa adkaanta sariirta qalabka mashiinka, sidaas darteed
hubinta xasilloonida habaynta.
X, Y, Z Dhammaantood waa Tilmaamaha Rullaluistemaadka Toosan
Dhinacyada X, Y, Z dhammaantood waa hagayaal toosan oo duuban, sidaas darteed, saxnaan sare
jarista culus waa la ogaan karaa.
X, Y, Z faasaskaAdibAlinearRollerGuide
Si loo gaaro saxnaan sare iyo jarid culus, dhidibka X, Y, iyo Z dhammaantood waxay isticmaalayaan hagaha duubista toosan
45° hal dhidibSbaalHmadaxa
1 Xagalka leexashadu waa weyn yahay, wuxuu noqon karaa xagasha -30°-180° ee farsamaynta shaqada, oo ku habboon farsamaynta qaybaha hawada sare.
2 Isku-dhafka madaxa ruxitaanka gacanta ee A63 wuxuu noqon karaa
ku habboon habaynta qaybaha isku dhafan ee baabuurta.
DhaqaaqiddaCrossbeamSqaab-dhismeedka, dhidibka ZDlaba jibbaaranSshaqaalahaMoveSisla markiiba
1 Sariirta/tiirka/birta waxaa laga sameeyay walxo bir ah oo cawlan, waxay si wax ku ool ah u nuugi kartaa gariirka iyada oo loo marayo qaab-dhismeedka garaafiga ah, qaab-dhismeedka yar, xoog dhisme oo aad u fiican iyo adkeysi.
2 Qaybaha dhaqaaqa waxaa laga sameeyay bir, si loo hubiyo xawaaraha dhaqdhaqaaqa fudud, dhaqsaha badan (≥60m/daqiiqo), iyo hufnaan farsamayn sare leh.
3 X/Y/Z dhidibka (≥1700mm), oo ku habboon farsamaynta qaybaha waaweyn
PrecislonClaambadTawood u leh
Qalabka rogidda shaft C CAM si loo baabi'iyo nadiifinta, si loo hubiyo saxnaanta sare iyo farsamaynta hufnaanta sare
Boorsooyinka Hollows-ka
Qaboojinta boolal-ka godka ah waxay hubineysaa in mashiinka uu shaqeynayo xawaare sare si loo ilaaliyo saxnaanta xasilloonida.
P145°SislingAxisSbaalHmadaxa
Qaab-dhismeedka adag ee sare
Kala duwanaansho ballaaran oo wax lagu farsameeyo ayaa yareyn karta isku-xidhka soo noqnoqda ee qaybaha shaqada waxayna hagaajin kartaa saxnaanta iyo hufnaanta habaynta
La qabsi wax ku ool ah oo heer sare ah, xulasho laba-dhidible oo caalami ah ayaa ballaarisa waxqabadka mashiinka, taas oo la mid ah ku darista dhidib gaar ah. Xitaa qaar ka mid ah shaqooyinka waaweyn ee aan si fudud loo rogi karin ama ka fog shuruudaha saxda ah, way ka waxtar badan tahay ku darista dhidibka afraad.
P2Dlaba jibbaaranSholderHbarigaSbaalHmadaxa
Soo-saareyaasha A-waxaa si toos ah u wada matoor xawaare hoose leh oo leh tiirar sare, iyada oo aan lahayn caqabado, saxnaan sare, iyo waxqabad jawaab celin firfircoon oo wanaagsan
Saliidda A-saliiddu waxay qaadataa qabsatooyin haydarooli ah, kuwaas oo leh awood isku xidhid oo xooggan iyo cimri dheer. Qaab yar iyo ficil la isku halleyn karo
Qalabka xadka xagasha gaarka ah ayaa ka dhigaya xakamaynta madaxa mid fudud.
Saxnaanta sare ee fiilada korontada, nadiifinta weyn ee sita iyo adkaanta sare.
P345°SislingAxisSbaalHmadaxa
Qaab-dhismeedka adag ee sare
Kala duwanaansho ballaaran oo wax lagu farsameeyo ayaa yareyn karta isku-xidhka soo noqnoqda ee qaybaha shaqada waxayna hagaajin kartaa saxnaanta iyo hufnaanta habaynta
La qabsi wax ku ool ah oo heer sare ah, xulasho laba-dhidible oo caalami ah ayaa ballaarisa waxqabadka mashiinka, taas oo la mid ah ku darista dhidib gaar ah. Xitaa qaar ka mid ah shaqooyinka waaweyn ee aan si fudud loo rogi karin ama ka fog shuruudaha saxda ah, way ka waxtar badan tahay ku darista dhidibka afraad.
P4 Dlaba jibbaaranSholderHbarigaSbaalHmadaxa
Soo-saareyaasha A-waxaa si toos ah u wada matoor xawaare hoose leh oo leh tiirar sare, iyada oo aan lahayn caqabado, saxnaan sare, iyo waxqabad jawaab celin firfircoon oo wanaagsan
Saliidda A-saliiddu waxay qaadataa qabsatooyin haydarooli ah, kuwaas oo leh awood isku xidhid oo xooggan iyo cimri dheer. Qaab yar iyo ficil la isku halleyn karo
Qalabka xadka xagasha gaarka ah ayaa ka dhigaya xakamaynta madaxa mid fudud.
Saxnaanta sare ee fiilada korontada, nadiifinta weyn ee sita iyo adkaanta sare.
LaysarkaToolSettingIqalab
Si dhakhso ah oo sax ah u ogaanshaha cabbirka qalabka si loo hubiyo isticmaalka muddada dheer iyada oo aan la xirin
OnlineDdoorashadaSnidaam
yaree dejinta qalabka iyo waqtiga isku-dubaridka shaqada, oo badbaadi 90% waqtiga dheeraadka ah.
SaliidMwaaGateringSnidaam
Heerka nadiifinta sare, hawlgalka xasilloon, sagxadda buuqa aamusan. Si wax ku ool ah u shaandhee hawada biyaha ku milma iyo qiiqa ceeryaamo saliidda ee goobta shaqada oo si qoto dheer u nadiifi hawada.
JaridFluidCoolingDbaarkin
Nidaamku wuxuu hubin karaa kor u kaca heerkulka dareeraha jarista 3-5℃ gudahood.
AxialGqiimeyntaRuler
Calaamadda wax soo saarka ee la cabbiray waa garaaca dhijitaalka ah, kaas oo leh astaamo kala duwan oo ogaanshaha ballaaran, saxnaanta ogaanshaha sare iyo xawaaraha jawaab celinta degdegga ah.
JebiyeyQalab DdoorashadaInTisagaJoornaalka
Qaybta ogaanshaha waxaa lagu rakibay joornaalka qalabka, habka ogaanshaha iyo habka farsamayntana waxaa la sameeyaa isku mar, iyada oo aan saameyn ku yeelanayn garaaca farsamaynta.
Miisaska Shaqada
Heerka Caadiga ahRdhulSsaldhiga isngleWorkbench
Miiska wareega oo leh gudbinta kamaradda duubista
Waxtar sare, dib-u-dhac la'aan, dayactir la'aan, adkeysi sare iyo culays culus.
Miiska wareega oo leh cutubka tusmada ugu yar ee 0.001°
Ikhtiyaar ahDlaba jibbaaranEisbeddelkaDlaba jibbaaranSxarunWorkbench
Xidhiidhka ka dhexeeya jidhka miiska shaqada iyo baaldiga waxaa lagu adkeeyaa koon 4-dhibcood ah iyadoo la adeegsanayo xoogga isku xidhka baaldiga.
Xoogga isku xidhka miiska shaqada wuxuu ilaaliyaa habaynta xasilloon ee jarista culus.
ATC
Waxaa loo isticmaali karaa bar dheer oo caajis ah iyo bir bir ah oo dhexroor weyn leh si loo hagaajiyo waxtarka wax soo saarka.
Qalabka beddelka qalabka fudud laakiin aadka loogu kalsoonaan karo ee kamaradda ku shaqeeya
waxay xaqiijin kartaa isbeddel degdeg ah oo qalab ah iyo xasillooni muddo dheer ah
hawlgal lagu dhimayo waqtiga aan jarin.
| Mashruuc | Cutubka | CP800 | CP800T2 | |
| Safar | Safarka dhidibka X/Y/Z | mm | 800x800x750 | 800x800x750 |
| Safarka dhidibka B | -30°-160° | -30°-160° | ||
| Safarka dhidibka C | 360° | 360° | ||
| Masaafada u dhaxaysa dunduleelka ilaa dusha miiska (dhidibka B 90 darajo oo jiifa) | mm | 290-1040 | 160-910 | |
| Masaafada u dhaxaysa dunduleelka ilaa dusha miiska (dhidibka B 0 darajo oo toosan) | mm | 47-797 | -83-667 | |
| Masaafada u dhaxaysa dunduleelka ilaa bartamaha miiska (dhidibka B 90 darajo oo jiif ah) | mm | -135-665 | -135-665 | |
| Masaafada u dhaxaysa dunduleelka ilaa bartamaha miiska (dhidibka B 0 darajo oo toosan) | mm | 108-908 | 108-908 | |
| Kala duwanaanshaha ugu badan ee habaynta | mm | φ720*910 | φ720*910 | |
| Quudinta saddex-dhidibka | Barakac degdeg ah oo dhidibka X/Y/Z ah | m/daqiiqad | 60/60/60 | 60/60/60 |
| Xawaaraha quudinta oo la jaray | mm/daqiiqad | 0-24000 | 0-24000 | |
| Miiska wareega (dhidibka C) | Tirada miisaska shaqada | 1 | 2 | |
| Dhexroorka saxanka | mm | φ650 | 500*500 | |
| Culays la oggol yahay | kg | 500 | 500 | |
| Xawaaraha ugu badan ee wareegga | rmp | 40 | 40 | |
| Saxnaanta booska/ku celcelinta | arc.sec | 15/10 | 15/10 | |
| dhidibka B | Xawaaraha ugu badan ee wareegga | rmp | 60 | 60 |
| Saxnaanta booska/ku celcelinta | arc.sec | 8/4 | 8/4 | |
| Spindle | Tilmaamaha Spindle-ka (dhexroorka rakibidda/qaabka gudbinta) | mm | 190/Ku dhex jira | 190/Ku dhex jira |
| Isgoyska | mm | A63 | A63 | |
| Xawaaraha ugu badan ee dunmiiqa | r/daqiiqad | 18000 | 18000 | |
| Awoodda matoorka isbaarada (joogto ah/S640%) | kW | 30/35 | 30/35 | |
| Dhaqdhaqaaqa matoorka isbaarada (joogto ah/S640%) | Nm | 72/85 | 72/85 | |
| Joornaalka Qalabka | Awoodda majaladda qalabka | 50T | 50T | |
| Waqtiga beddelka qalabka (TT) | S | 7 | 7 | |
| Dhexroorka qalabka ugu badan (qalab buuxa/qalab madhan) | mm | 80/150 | 80/150 | |
| Dhererka qalabka ugu badan | Mm | 450 | 450 | |
| Miisaanka qalabka ugu badan | kg | 8 | 8 | |
| Tareenka hagaha | Tareenka hagaha ee dhidibka X (cabbirka/tirada bogagga) | mm | 45/2 | 45/2 |
| Tareenka hagaha ee dhidibka Y (cabirka/tirada bogagga) | mm | 45/3 | 45/3 | |
| Tareenka hagaha ee dhidibka Z (cabirka/tirada bogagga) | mm | 45/2 | 45/2 | |
| Gudbinta Saddex-dhidibka ah | Boolul X-dhidibka ah | N | 2R40x20 | 2R40x20 |
| Boolal dhidibka Y ah | N | 2R40x20 | 2R40x20 | |
| Boolal dhidibka Z-dhidibka ah | N | 2R40x20 | 2R40x20 | |
| Saxnaanta saddex-dhidibka | Saxnaanta booska | mm | ±0.005/300 | ±0.005/300 |
| Saxnaanta booska ku celcelinta | mm | ±0.003/300 | ±0.003/300 | |
| Nidaamka saliidaynta | Awoodda cutubka saliidda | L | 0.7 | 0.7 |
| Nooca saliidaynta | Saliidaynta dufanka | Saliidaynta dufanka | ||
| Kale | Shuruudaha hawada | kg/cm² | ≥6 | ≥6 |
| Socodka isha hawada | mm³/daqiiqad | ≥0.5 | ≥0.5 | |
| Miisaanka mashiinka | KG | 10.5 | 11 | |
| Mashruuc | Cutubka | CP1100 | CP1100T2 | |
| Safar | Safarka dhidibka X/Y/Z | mm | 980x1140x680 | 980x1140x500 |
| Safarka dhidibka B | -30°-180° | -30°-180° | ||
| Safarka dhidibka C | 360° | 360° | ||
| Masaafada u dhaxaysa dunduleelka ilaa dusha miiska (dhidibka B 90 darajo oo jiifa) | mm | 100-780 | 100-600 | |
| Masaafada u dhaxaysa dunduleelka ilaa dusha miiska (dhidibka B 0 darajo oo toosan) | mm | 0-680 | 0-500 | |
| Masaafada u dhaxaysa dunduleelka ilaa bartamaha miiska (dhidibka B 90 darajo oo jiif ah) | mm | -260-720 | -260-720 | |
| Masaafada u dhaxaysa dunduleelka ilaa bartamaha miiska (dhidibka B 0 darajo oo toosan) | mm | -160-820 | -160-820 | |
| Kala duwanaanshaha ugu badan ee habaynta | mm | φ1120*780 | φ1120*600 | |
| Quudinta saddex-dhidibka | Barakac degdeg ah oo dhidibka X/Y/Z ah | m/daqiiqad | 60/60/60 | 60/60/60 |
| Xawaaraha quudinta oo la jaray | mm/daqiiqad | 0-24000 | 0-24000 | |
| Miiska wareega (dhidibka C) | Tirada miisaska shaqada | 1 | 2 | |
| Dhexroorka saxanka | mm | φ800 | 630*630 | |
| Culays la oggol yahay | kg | 1200 | 1000 | |
| Xawaaraha ugu badan ee wareegga | rmp | 30 | 30 | |
| Saxnaanta booska/ku celcelinta | arc.sec | 15/10 | 15/10 | |
| dhidibka B | Xawaaraha ugu badan ee wareegga | rmp | 50 | 50 |
| Saxnaanta booska/ku celcelinta | arc.sec | 8/4 | 8/4 | |
| Spindle | Tilmaamaha Spindle-ka (dhexroorka rakibidda/qaabka gudbinta) | mm | 230/Ku dhex jira | 230/Ku dhex jira |
| Isgoyska | mm | A100 | A100 | |
| Xawaaraha ugu badan ee dunmiiqa | r/daqiiqad | 10000 | 10000 | |
| Awoodda matoorka isbaarada (joogto ah/S640%) | kW | 54/65 | 54/65 | |
| Dhaqdhaqaaqa matoorka isbaarada (joogto ah/S640%) | Nm | 200/230 | 200/230 | |
| Joornaalka Qalabka | Awoodda majaladda qalabka | 50T | 50T | |
| Waqtiga beddelka qalabka (TT) | S | 8 | 8 | |
| Dhexroorka qalabka ugu badan (qalab buuxa/qalab madhan) | mm | 120/240 | 120/240 | |
| Dhererka qalabka ugu badan | Mm | 450 | 450 | |
| Miisaanka qalabka ugu badan | kg | 15 | 15 | |
| Tareenka hagaha | Tareenka hagaha ee dhidibka X (cabbirka/tirada bogagga) | mm | 55/2 | 55/2 |
| Tareenka hagaha ee dhidibka Y (cabirka/tirada bogagga) | mm | 55/3 | 55/3 | |
| Tareenka hagaha ee dhidibka Z (cabirka/tirada bogagga) | mm | 55/2 | 55/2 | |
| Gudbinta Saddex-dhidibka ah | Boolul X-dhidibka ah | N | 2R50x20 | 2R50x20 |
| Boolal dhidibka Y ah | N | 2R50x20 | 2R50x20 | |
| Boolal dhidibka Z-dhidibka ah | N | 2R50x20 | 2R50x20 | |
| Saxnaanta saddex-dhidibka | Saxnaanta booska | mm | 0.005/300 | 0.005/300 |
| Saxnaanta booska ku celcelinta | mm | 0.003/300 | 0.003/300 | |
| Nidaamka saliidaynta | Awoodda cutubka saliidda | L | 0.7 | 0.7 |
| Nooca saliidaynta | Saliidaynta dufanka | Saliidaynta dufanka | ||
| Kale | Shuruudaha hawada | kg/cm² | ≥6 | ≥6 |
| Socodka isha hawada | mm³/daqiiqad | ≥0.5 | ≥0.5 | |
| Miisaanka mashiinka | KG | 23 | 24 | |
| Mashruuc | Cutubka | CP1600 | CP1600T2 | |
| Safar | Safarka dhidibka X/Y/Z | mm | 1550x1540x1115 | 1550x1540x940 |
| Safarka dhidibka B | -30°-180° | -30°-180° | ||
| Safarka dhidibka C | 360° | 360° | ||
| Masaafada u dhaxaysa dunduleelka ilaa dusha miiska (dhidibka B 90 darajo oo jiifa) | mm | 100-1215 | 100-1040 | |
| Masaafada u dhaxaysa dunduleelka ilaa dusha miiska (dhidibka B 0 darajo oo toosan) | mm | 0-1115 | 0-940 | |
| Masaafada u dhaxaysa dunduleelka ilaa bartamaha miiska (dhidibka B 90 darajo oo jiif ah) | mm | -160-1290 | -160-1290 | |
| Masaafada u dhaxaysa dunduleelka ilaa bartamaha miiska (dhidibka B 0 darajo oo toosan) | mm | -60-1390 | -60-1390 | |
| Kala duwanaanshaha ugu badan ee habaynta | mm | φ1490*1215 | φ1490*1040 | |
| Quudinta saddex-dhidibka | Barakac degdeg ah oo dhidibka X/Y/Z ah | m/daqiiqad | 42/42/42 | 42/42/42 |
| Xawaaraha quudinta oo la jaray | mm/daqiiqad | 0-24000 | 0-24000 | |
| Miiska wareega (dhidibka C) | Tirada miisaska shaqada | 1 | 2 | |
| Dhexroorka saxanka | mm | φ1200 | 800*800 | |
| Culays la oggol yahay | kg | 2000 | 1800 | |
| Xawaaraha ugu badan ee wareegga | rmp | 20 | 20 | |
| Saxnaanta booska/ku celcelinta | arc.sec | 15/10 | 15/10 | |
| dhidibka B | Xawaaraha ugu badan ee wareegga | rmp | 50 | 50 |
| Saxnaanta booska/ku celcelinta | arc.sec | 8/4 | 8/4 | |
| Spindle | Tilmaamaha Spindle-ka (dhexroorka rakibidda/qaabka gudbinta) | mm | 230/Ku dhex jira | 230/Ku dhex jira |
| Isgoyska | mm | A100 | A100 | |
| Xawaaraha ugu badan ee dunmiiqa | r/daqiiqad | 10000 | 10000 | |
| Awoodda matoorka isbaarada (joogto ah/S640%) | kW | 54/65 | 54/65 | |
| Dhaqdhaqaaqa matoorka isbaarada (joogto ah/S640%) | Nm | 200/230 | 200/230 | |
| Joornaalka Qalabka | Awoodda majaladda qalabka | 50T | 50T | |
| Waqtiga beddelka qalabka (TT) | S | 8 | 8 | |
| Dhexroorka qalabka ugu badan (qalab buuxa/qalab madhan) | mm | 120/240 | 120/240 | |
| Dhererka qalabka ugu badan | Mm | 450 | 450 | |
| Miisaanka qalabka ugu badan | kg | 15 | 15 | |
| Tareenka hagaha | Tareenka hagaha ee dhidibka X (cabbirka/tirada bogagga) | mm | 65/2 | 65/2 |
| Tareenka hagaha ee dhidibka Y (cabirka/tirada bogagga) | mm | 55/3 | 55/3 | |
| Tareenka hagaha ee dhidibka Z (cabirka/tirada bogagga) | mm | 55/2 | 55/2 | |
| Gudbinta Saddex-dhidibka ah | Boolul X-dhidibka ah | N | 55×16 | 55×16 |
| Boolal dhidibka Y ah | N | 55×16 | 55×16 | |
| Boolal dhidibka Z-dhidibka ah | N | 2R50x20 | 2R50x20 | |
| Saxnaanta saddex-dhidibka | Saxnaanta booska | mm | 0.005/300 | 0.005/300 |
| Saxnaanta booska ku celcelinta | mm | 0.003/300 | 0.003/300 | |
| Nidaamka saliidaynta | Awoodda cutubka saliidda | L | 0.7 | 0.7 |
| Nooca saliidaynta | Saliidaynta dufanka | Saliidaynta dufanka | ||
| Kale | Shuruudaha hawada | kg/cm² | ≥6 | ≥6 |
| Socodka isha hawada | mm³/daqiiqad | ≥0.5 | ≥0.5 | |
| Miisaanka mashiinka | KG | 30 | 31 | |
| Mashruuc | Cutubka | CP2000 | CPCP2000V2V | |
| Safar | Safarka dhidibka X/Y/Z | mm | 2000x1700x1400 | 1700x1750x1700 |
| Safarka dhidibka B | -30°-180° | -30°-160° | ||
| Safarka dhidibka C | 360° | 0-360° | ||
| Masaafada u dhaxaysa dunduleelka ilaa dusha miiska (dhidibka B 90 darajo oo jiifa) | mm | 100-1500 | -43-1657 | |
| Masaafada u dhaxaysa dunduleelka ilaa dusha miiska (dhidibka B 0 darajo oo toosan) | mm | 0-1400 | 200-1900 | |
| Masaafada u dhaxaysa dunduleelka ilaa bartamaha miiska (dhidibka B 90 darajo oo jiif ah) | mm | -1000-1000 | -57-1643 | |
| Masaafada u dhaxaysa dunduleelka ilaa bartamaha miiska (dhidibka B 0 darajo oo toosan) | mm | -900-1100 | -300-1400 | |
| Kala duwanaanshaha ugu badan ee habaynta | mm | φ1680*1500 | φ1700*1900 | |
| Quudinta saddex-dhidibka | Barakac degdeg ah oo dhidibka X/Y/Z ah | m/daqiiqad | 60/60/60 | 60/90/90 |
| Xawaaraha quudinta oo la jaray | mm/daqiiqad | 0-24000 | 0-24000 | |
| Miiska wareega (dhidibka C) | Tirada miisaska shaqada | 1 | 1 | |
| Dhexroorka saxanka | mm | φ1600 | 800*800 | |
| Culays la oggol yahay | kg | 3000 | 1500 | |
| Xawaaraha ugu badan ee wareegga | rmp | 20 | 60 | |
| Saxnaanta booska/ku celcelinta | arc.sec | 10/6 | 8/4 | |
| dhidibka B | Xawaaraha ugu badan ee wareegga | rmp | 50 | 60 |
| Saxnaanta booska/ku celcelinta | arc.sec | 8/4 | 8/4 | |
| Spindle | Tilmaamaha Spindle-ka (dhexroorka rakibidda/qaabka gudbinta) | mm | 230/Ku dhex jira | 190/Ku dhex jira |
| Isgoyska | mm | A100 | A63 | |
| Xawaaraha ugu badan ee dunmiiqa | r/daqiiqad | 10000 | 18000 | |
| Awoodda matoorka isbaarada (joogto ah/S640%) | kW | 54/65 | 30/35 | |
| Dhaqdhaqaaqa matoorka isbaarada (joogto ah/S640%) | Nm | 200/230 | 70/85 | |
| Joornaalka Qalabka | Awoodda majaladda qalabka | 50T | 50T | |
| Waqtiga beddelka qalabka (TT) | S | 8 | 7 | |
| Dhexroorka qalabka ugu badan (qalab buuxa/qalab madhan) | mm | 120/240 | 80/150 | |
| Dhererka qalabka ugu badan | Mm | 450 | 450 | |
| Miisaanka qalabka ugu badan | kg | 15 | 8 | |
| Tareenka hagaha | Tareenka hagaha ee dhidibka X (cabbirka/tirada bogagga) | mm | 55/3 | 55/3 |
| Tareenka hagaha ee dhidibka Y (cabirka/tirada bogagga) | mm | 45/3 | 45/3 | |
| Tareenka hagaha ee dhidibka Z (cabirka/tirada bogagga) | mm | 55/2 | 55/2 | |
| Gudbinta Saddex-dhidibka ah | Boolul X-dhidibka ah | N | 63×25 | 63×25 |
| Boolal dhidibka Y ah | N | 50 × 25 | 50 × 32 | |
| Boolal dhidibka Z-dhidibka ah | N | 50 * 25 * 2 | 50 * 32 * 2 | |
| Saxnaanta saddex-dhidibka | Saxnaanta booska | mm | 0.005/300 | 0.005/300 |
| Saxnaanta booska ku celcelinta | mm | 0.003/300 | 0.003/300 | |
| Nidaamka saliidaynta | Awoodda cutubka saliidda | L | 0.7 | 0.7 |
| Nooca saliidaynta | Saliidaynta dufanka | Saliidaynta dufanka | ||
| Kale | Shuruudaha hawada | kg/cm² | ≥6 | ≥6 |
| Socodka isha hawada | mm³/daqiiqad | ≥0.5 | ≥0.5 | |
| Miisaanka mashiinka | KG | 42 | 42 | |
Qaybaha alaabta
-
Xarunta Mashiinka CNC ee Taxanaha VC ee Adkaanta Sare...
-
Tilmaamaha Toosan ee Taxanaha HP Taxanaha Jiifka ah ee Dhaqaaqaya Tiirka...
-
Tilmaamaha Toosan ee Tiirka HT ee Jiifka ah ee Dhaqaaqa...
-
VS Taxanaha Afar-track Culus ee CNC Machining C ...
-
Xarunta Mashiinka CNC ee Taxanaha V oo leh Adkayn Sare
-
Xarunta Mashiinka CNC ee Taxanaha X ee Laba-geeska ah
-
Xarunta Mashiinka CNC ee 5-dhidibka Jiifka ah TKG1600
-
Cent-ka CNC ee toosan ee leexashada iyo shiididda...
-
Xarunta Mashiinka CNC Xawaaraha Sare Taxanaha GM
-
Taxanaha CNC ee Xawaaraha Sare
-
Lathe CNC oo laba-laab ah SK32
-
Xarunta Mashiinka Toosan ee CNC RFTV510 ee loogu talagalay Giraangiraha...