Taxanaha TC Tareenka Xawaaraha Sare ee Servo Turret Tailstock CNC Lathe
Habaynta Badeecada
Astaamaha
Adkayn sare, jarid culus, xasillooni sare:
Waxay qaadataa sariir isku dhafan oo loo sameeyay qaab dhismeed iyo bir hagitaan ah oo 30° u janjeera, taasoo u sahlaysa hawlwadeenka inuu fuulo oo ka dego shaqada, habka jaristana waa mid siman.
Saxnaan sare iyo jawaab firfircoon oo sare:
Iyada oo la adeegsanayo laba lammaane oo ah biinanka NSK P4 ee saxsan, isteerinku wuxuu gaaraa adkeysi sare iyo saxnaan wareeg oo aad u sarreeya. Isteerinku wuxuu gaaraa nidaaminta xawaaraha aan tallaabo lahayn iyada oo loo marayo matoorka AC servo.
Xasiloonida kulaylka:
Sanduuqa ugu weyn ee isdul-wareegga iyo koorta simbiriirixanaysa waxay ku yaalliin isla gees, taas oo yaraynaysa qallooca ka dhasha isbeddelka kulaylka ee sanduuqa ugu weyn ee isdul-wareegga.
Adeegsiga boodhadhka rogrogmada xawaaraha sare leh iyo saliidaynta shaabadaynta dufanka tirada si loo hubiyo xasilloonida kulaylka ee jirka iyo heerkulka wareegga.
Tilmaamaha Farsamada
| Shay | CNC-860TC-1000H | CNC-860TC/1500(H) | CNC-860TC/2000(H) | |
| Sariir | Sariirta iyo salka waxay ka samaysan yihiin bir tayo sare leh, sariirtuna waxay u janjeertaa 30°. | |||
| Kala duwanaanshaha habaynta | Dhexroorka ugu badan ee wareegga sariirta | Φ880mm | Φ880mm | Φ880mm |
| Dhexroorka ugu badan ee habaynta ee saxannada | Φ600mm | Φ600mm | Φ600mm | |
| Dhexroorka ugu badan ee habaynta ee gaadhiga | Φ600mm | Φ600mm | Φ600mm | |
| Dhererka ugu badan ee habaynta ee baarka | 950mm | 1550mm | 2100mm | |
| Dhexroorka ugu badan ee godka baarka | Φ75 | Φ75 | Φ75 | |
| Quudinta Safarka | Safarka ugu badan ee dhidibka X | 330mm | 330mm | 330mm |
| Safarka ugu badan ee dhidibka Z | 1200mm | 1800mm | 2400mm | |
| Heerka dhaqdhaqaaqa degdega ah ee dhidibka X/Z | 16m/daqiiqo | 16m/daqiiqo | 16m/daqiiqo | |
| Dhexroorka boolal X/Z/garoonka | X:40/08 Z:50/10 | X:40/08 Z:50/10 | X:40/08 Z:50/10 | |
| Tilmaamaha wadada slide dhidibka X/Z | Jidka slide square | Jidka slide square | Jidka slide square | |
| Matoorka servo-ga X-dhidibka | α22(oo leh biriig) | α22(oo leh biriig) | α22(oo leh biriig) | |
| Matoorka adeegga ee Z-dhidibka | α22 | α22 | α30 | |
| Mashiinka servo-ga ee Turret | 1KW | 1KW | 1KW | |
| Matoorka madaxa korontada | α22 | α22 | α22 | |
| Saxnaanta | Saxnaanta booska dhidibka X/Z | ±0.005/300mm | ±0.005/300mm | ±0.005/300mm |
| Saxnaanta ku celcelinta dhidibka X/Z | ±0.005/300mm | ±0.005/300mm | ±0.005/300mm | |
| Dabada dambe | Tilmaamaha gacmo-gashiyada dabada | Mohs5#/1050mm | Mohs5#/1600mm | Mohs5#/2100mm |
| Dhexroorka gacmo-gashi ee dabada/safarka | Φ100/80 | Φ100/80 | Φ100/80 | |
| Kala duwanaanshaha cadaadiska dabada | 5 ~ 30kg/cm2 | 5 ~ 30kg/cm2 | 5 ~ 30kg/cm2 | |
| Habka dhaqaajinta dabada | Qabasho gacanta ah (oo ay waddo koorso) | Qabasho gacanta ah (oo ay waddo koorso) | Qabasho gacanta ah (oo ay waddo koorso) | |
| Spindle | Nooca sanka ee isbuunyada | A2-8 | A2-8 | A2-8 |
| Dhexroorka godka dunmiiqa dhex mara | Φ87 | Φ87 | Φ87 | |
| Xawaaraha ugu badan ee dunmiiqa | 2500rpm | 2500rpm | 2500rpm | |
| Awoodda matoorka adeegga dunmiiqa | 22kw | 22kw | 30kw | |
| Turret | Munaaradda ku shaqeysa Servo | Shaqooyinka BMT65/12 | Shaqooyinka BMT65/12 | Shaqooyinka BMT65/12 |
| Tilmaamaha qalabka jarista | 380 | 380 | 380 | |
| Qeexitaannada hayaha qalabka | □25*25Φ40 | □25*25Φ40 | □25*25Φ40 | |
| Madaxa wax lagu shiido dhinaca 0 digrii (1 gabal) | ER40/4000rpm | ER40/4000rpm | ER40/4000rpm | |
| Madaxa wax lagu shiido dhinaca 90 digrii (1 gabal) | ER40/4000rpm | ER40/4000rpm | ER40/4000rpm | |
| Kale | Wadarta awoodda | 46KW | 46KW | 55KW |
| Miisaanka saafiga ah ee mashiinka | Qiyaastii 6500kg | Qiyaastii 7000kg | Qiyaastii 8000kg | |
| Cabbirka mashiinka (dhererka*ballaca*dhererka) | 5100 * 2300 * 2200 | 6000 * 2500 * 2100 | 6500*2500*2100 | |
Sifooyinka Habaynta
Spindle
Taageer jarista saxnaanta sare iyo shaqada culus si loo kordhiyo wax soo saarka.
Turret
Waxay hagaajisaa isku halaynta tusmada waxayna hubisaa adkaansho sare.
Nidaamka
Heerka caadiga ah ee FANUC F Oi-TF Plus CNC Nidaamka, waxqabadka sare ee habaynta heerka hawlgalka oo sarreeya, fududayn sare oo isticmaal ah.
Adkeysi Sare
Jilayaasha shaqada culusISaldhigga iyo Qaybaha, Nuugista shoogga xooggan iyo xasillooni sare.
SANDUUQ KORONTO
Ku kaydi qaybaha korontada ee makiinada si aad u ilaaliso, iyadoo si fiican u daadanaysa kulaylka..
TAREEN ADAG
Tareenka adag wuxuu leeyahay is jiidjiid sare, firfircooni, iyo xoog. Adkeyn wanaagsan iyo awood culays qaadis oo xooggan.
Adkayn sare, jarid culus, xasillooni sare:
Waxay qaadataa sariir isku dhafan oo loo sameeyay qaab dhismeed iyo bir hagitaan ah oo 30° u janjeera, taasoo u sahlaysa hawlwadeenka inuu fuulo oo ka dego shaqada, habka jaristana waa mid siman.
Saxnaan sare iyo jawaab firfircoon oo sare:
Iyada oo la adeegsanayo laba lammaane oo ah biinanka NSK P4 ee saxsan, isteerinku wuxuu gaaraa adkeysi sare iyo saxnaan wareeg oo aad u sarreeya. Isteerinku wuxuu gaaraa nidaaminta xawaaraha aan tallaabo lahayn iyada oo loo marayo matoorka AC servo.
Xasiloonida kulaylka:
Sanduuqa ugu weyn ee isdul-wareegga iyo koorta simbiriirixanaysa waxay ku yaalliin isla gees, taas oo yaraynaysa qallooca ka dhasha isbeddelka kulaylka ee sanduuqa ugu weyn ee isdul-wareegga.
Adeegsiga boodhadhka rogrogmada xawaaraha sare leh iyo saliidaynta shaabadaynta dufanka tirada si loo hubiyo xasilloonida kulaylka ee jirka iyo heerkulka wareegga.
| Shay | CNC-860TC-1000H | CNC-860TC/1500(H) | CNC-860TC/2000(H) | |
| Sariir | Sariirta iyo salka waxay ka samaysan yihiin bir tayo sare leh, sariirtuna waxay u janjeertaa 30°. | |||
| Kala duwanaanshaha habaynta | Dhexroorka ugu badan ee wareegga sariirta | Φ880mm | Φ880mm | Φ880mm |
| Dhexroorka ugu badan ee habaynta ee saxannada | Φ600mm | Φ600mm | Φ600mm | |
| Dhexroorka ugu badan ee habaynta ee gaadhiga | Φ600mm | Φ600mm | Φ600mm | |
| Dhererka ugu badan ee habaynta ee baarka | 950mm | 1550mm | 2100mm | |
| Dhexroorka ugu badan ee godka baarka | Φ75 | Φ75 | Φ75 | |
| Quudinta Safarka | Safarka ugu badan ee dhidibka X | 330mm | 330mm | 330mm |
| Safarka ugu badan ee dhidibka Z | 1200mm | 1800mm | 2400mm | |
| Heerka dhaqdhaqaaqa degdega ah ee dhidibka X/Z | 16m/daqiiqo | 16m/daqiiqo | 16m/daqiiqo | |
| Dhexroorka boolal X/Z/garoonka | X:40/08 Z:50/10 | X:40/08 Z:50/10 | X:40/08 Z:50/10 | |
| Tilmaamaha wadada slide dhidibka X/Z | Jidka slide square | Jidka slide square | Jidka slide square | |
| Matoorka servo-ga X-dhidibka | α22(oo leh biriijo) | α22(oo leh biriijo) | α22(oo leh biriijo) | |
| Matoorka adeegga ee Z-dhidibka | α22 | α22 | α30 | |
| Mashiinka servo-ga ee Turret | 1KW | 1KW | 1KW | |
| Matoorka madaxa korontada | α22 | α22 | α22 | |
| Saxnaanta | Saxnaanta booska dhidibka X/Z | ±0.005/300mm | ±0.005/300mm | ±0.005/300mm |
| Saxnaanta ku celcelinta dhidibka X/Z | ±0.005/300mm | ±0.005/300mm | ±0.005/300mm | |
| Dabada dambe | Tilmaamaha gacmo-gashiyada dabada | Mohs5#/1050mm | Mohs5#/1600mm | Mohs5#/2100mm |
| Dhexroorka gacmo-gashi ee dabada/safarka | Φ100/80 | Φ100/80 | Φ100/80 | |
| Kala duwanaanshaha cadaadiska dabada | 5 ~ 30kg/cm2 | 5 ~ 30kg/cm2 | 5 ~ 30kg/cm2 | |
| Habka dhaqaajinta dabada | Qabasho gacanta ah (oo ay waddo koorso) | Qabasho gacanta ah (oo ay waddo koorso) | Qabasho gacanta ah (oo ay waddo koorso) | |
| Spindle | Nooca sanka ee isbuunyada | A2-8 | A2-8 | A2-8 |
| Dhexroorka godka dunmiiqa dhex mara | Φ87 | Φ87 | Φ87 | |
| Xawaaraha ugu badan ee dunmiiqa | 2500rpm | 2500rpm | 2500rpm | |
| Awoodda matoorka adeegga dunmiiqa | 22kw | 22kw | 30kw | |
| Turret | Munaaradda ku shaqeysa Servo | Shaqooyinka BMT65/12 | Shaqooyinka BMT65/12 | Shaqooyinka BMT65/12 |
| Tilmaamaha qalabka jarista | 380 | 380 | 380 | |
| Qeexitaannada hayaha qalabka | □25*25Φ40 | □25*25Φ40 | □25*25Φ40 | |
| Madaxa wax lagu shiido dhinaca 0 digrii (1 gabal) | ER40/4000rpm | ER40/4000rpm | ER40/4000rpm | |
| Madaxa wax lagu shiido dhinaca 90 digrii (1 gabal) | ER40/4000rpm | ER40/4000rpm | ER40/4000rpm | |
| Kale | Wadarta awoodda | 46KW | 46KW | 55KW |
| Miisaanka saafiga ah ee mashiinka | Qiyaastii 6500kg | Qiyaastii 7000kg | Qiyaastii 8000kg | |
| Cabbirka mashiinka (dhererka*ballaca*dhererka) | 5100 * 2300 * 2200 | 6000 * 2500 * 2100 | 6500*2500*2100 | |
Qaybaha alaabta
-
Xarunta Mashiinka CNC ee Taxanaha VC ee Adkaanta Sare...
-
Tilmaamaha Toosan ee Taxanaha HP Taxanaha Jiifka ah ee Dhaqaaqaya Tiirka...
-
Tilmaamaha Toosan ee Tiirka HT ee Jiifka ah ee Dhaqaaqa...
-
VS Taxanaha Afar-track Culus ee CNC Machining C ...
-
Xarunta Mashiinka CNC ee Taxanaha V oo leh Adkayn Sare
-
Xarunta Mashiinka CNC ee Taxanaha X ee Laba-geeska ah
-
Xarunta Mashiinka CNC ee 5-dhidibka Jiifka ah TKG1600
-
Cent-ka CNC ee toosan ee leexashada iyo shiididda...
-
Xarunta Mashiinka CNC Xawaaraha Sare Taxanaha GM
-
Taxanaha CNC ee Xawaaraha Sare
-
Lathe CNC oo laba-laab ah SK32
-
Xarunta Mashiinka Toosan ee CNC RFTV510 ee loogu talagalay Giraangiraha...